Industrial computing systems need more power, but they also need to manage heat, board space, and energy consumption.
At electronica 2026 in Munich, Southchip showcased its industrial power IC portfolio across three areas: High Integration, High Power, and Ultra-Low IQ design blocks. The solutions address power delivery challenges in AI servers, robotics, edge computing, and industrial automation, combining higher power density with reduced idle consumption and fewer external components.
Read how Southchip is approaching power efficiency in industrial computing: wevlv.co/4iSLmJJ
#engineering #technology #electronics
What happens when an EDA environment has enough compute capacity, but design jobs are still waiting to run?
The bottleneck may be scheduler delays, workflow dependencies, licence contention, or limited access to specialized verification resources.
EDA workloads can generate millions of simulation, verification, synthesis, and analysis jobs with different runtimes and resource needs. Intel reports that its silicon design engineers run over 273 million compute-intensive batch jobs every week.
This article explores why specialized HPC management is essential for improving design and verification throughput.
Learn more: wevlv.co/4zZISzk
#engineering #technology #computing
@Siemens
AI data centers are generating more heat than traditional cooling systems can handle.
As server racks move from 20–40kW towards megawatt-level power demands, engineers are rethinking how heat is removed. Liquid cooling is becoming increasingly important, using cold plates, pumps, and coolant distribution units to remove heat directly from chips.
Sensors and edge AI are also helping monitor temperature, pressure, and coolant flow, detecting potential failures before they disrupt operations.
This article explores how engineers are tackling the growing thermal management challenge.
Learn more: wevlv.co/48oQ7ol
#engineering #technology #artificialintelligence
@MouserElec
Treating water is no longer the biggest challenge. Getting proven solutions deployed is.
From monitoring contaminants and integrating operational data to navigating regulations and public trust, several barriers stand between water treatment technology and widespread adoption.
Examples from the Permian Basin, Namibia, Singapore, and other regions show what is possible when technology is supported by the right infrastructure and policies.
What will it take to make safe, treated water more accessible? This article explores the challenges holding deployment back.
Read more: wevlv.co/4CpbaVA
#engineering #technology #sustainability
@MouserElec
South Korean startup Diden Robotics builds the Diden Spider, a quadruped that climbs steel walls on switchable magnetic feet to weld and inspect inside ships. It finds its way by matching 3D scans to the ship's CAD drawings and learned to walk in simulated shipyards before going into the field.
Video Credit: Diden Robotics
#engineering #technology #robotics
Soft robots need to bend and stretch, but rigid components can create weak spots where the two materials meet. So, Texas Engineers are finding a way to print both in one piece.
Using different wavelengths of light, their 3D printing technique can create everything from soft, flexible sections to rigid structures, with gradual transitions in between.
They’ve already used it to create a robotic hand with bone-like structures and a tiny walking robot that traveled 2.3 times farther than an all-soft version in one test.
More flexible, durable robots that could one day help with everything from prosthetics to medical robotics
Video Credit: @CockrellSchool
#engineering #technology #robotics #3dprinting #additivemanufacturing
Researchers have used reinforcement learning to teach a 5-tonne John Deere skid-steer loader to perform complex acrobatic manoeuvres autonomously. Trained in simulation and transferred to a real machine, the system can balance on two wheels, navigate rough terrain, spin, and control its bucket before landing safely.
The research demonstrates the potential of AI-driven automation for heavy construction and industrial machinery.
Video Credit: @leggedrobotics / @ETH
Paper: wevlv.co/4kltYys
#engineering #technology
What if dimensional inspection could happen directly on the factory floor, without a separate computer?
The FreeScan Omni from SHINING 3D combines 3D scanning, data processing, inspection, and report generation in one wireless device. With a stated metrology accuracy of 0.02 mm, it allows engineers to inspect components, compare measurements against CAD models, and identify deviations on-site.
From manufacturing quality control to aircraft maintenance and large-component inspection, discover how portable 3D metrology is changing shop-floor workflows: wevlv.co/4zLLNLH
#engineering #technology #manufacturing #3dscanning
@Shining3D
A functional prototype of an sEMG-controlled robotic hand uses four forearm sensors to interpret muscle signals and control movement. The project combines custom analog circuitry, galvanic isolation, signal filtering, and embedded firmware with DSP and TinyML classification. It also involved developing and testing a custom PCB and refining real-world circuit performance.
Credit: Adrián San Juan / Óscar García Redondo
#engineering #technology #robotics
AI is making it easier to investigate compiled software, potentially exposing proprietary algorithms, licence checks, and security vulnerabilities. By connecting large language models to reverse engineering tools like Ghidra through the Model Context Protocol (MCP), analysts can search, decompile, and trace functions with less manual navigation.
For manufacturers, this creates a growing need to protect valuable firmware and embedded software. Techniques such as code obfuscation, anti-tamper measures, and binary protection can make analysis more difficult, but their effectiveness needs testing against real-world AI-assisted workflows.
Learn more: wevlv.co/3UXTxeA
#engineering #technology #emproof
@emproofsecurity
A planar motor system consists of mobile XBots (movers) operating over a stationary array of modular Flyways (stators). Each XBot is independently controlled and magnetically levitated, providing six degrees of freedom, including linear and rotational motion.
The system operates without mechanical contact, eliminating the need for lubrication and minimizing wear. It does not generate particulate contamination, making it suitable for environments requiring high cleanliness, such as food processing, cosmetics production, and pharmaceutical manufacturing, as well as applications requiring sealed or washdown conditions.
Video Credit: Planar Motor
#engineering #technology
Smart sensors are becoming smaller, more intelligent, and increasingly independent. But what does this mean for the engineers developing them?
Advances in MEMS, ambient IoT, and edge AI are changing how sensors are designed and deployed. Battery-free operation requires expertise in ultra-low-power hardware and energy harvesting, while on-device AI introduces new skills in model training, optimization, and sensor fusion.
This article explores how smart sensor innovation is reshaping the skills engineers need across hardware, software, and data engineering.
Learn more: wevlv.co/4sZm67U
#engineering #sensors #technology
@MouserElec
SpaceX has successfully caught Starship’s upper stage for the first time, using mechanical arms nicknamed “chopsticks” on its launch tower after a 22.5-hour flight.
An attempt to recover the booster was aborted shortly after launch. Recovering both stages is key to making Starship reusable and reducing launch costs.
Video Credit: @michaelbaylor
#spacex #engineering #technology
Quantum computing is not set to replace high-performance computing (HPC). Instead, the two technologies are expected to work together, combining classical computing capabilities with quantum processing for specialised tasks. This shift introduces new infrastructure requirements, from workload orchestration and resource scheduling to reliable data transfer and connectivity. As early hybrid applications emerge in areas such as fraud detection, organisations need to prepare their existing HPC environments for quantum integration.
This article explores how hybrid computing workflows are taking shape and what it takes to get ready.
Learn more: wevlv.co/4Ax1yX1
#engineering #technology #quantumcomputing
@Siemens
Georgia Tech aerospace engineering student Tomas Salvo has developed the Reaper, a high-speed remote-controlled jet initially designed in his dorm room. During testing, the aircraft reached 790 km/h, potentially surpassing the existing RC jet speed record of 465.544 km/h. Built with carbon-fibre components and a Jetcat P250 engine, the aircraft is undergoing further development, with potential applications as a drone interceptor. Salvo hopes to commercialise the design and eventually develop a supersonic aircraft.
Video Credit: Georgia Tech
#engineering #technology #drones
NVIDIA’s GR00T 2 is a robot foundation model designed to help robots learn, adapt and perform complex physical tasks. By combining human videos, robot demonstrations and predictions of future actions, it enables robots to transfer skills between different machines and learn new tasks from just a few demonstrations.
Tested on humanoid robots and dexterous robotic hands, GR00T 2 demonstrates improvements in assembly, object handling, whole-body movement and real-world task execution.
Video Credit: NVIDIA
#engineering #technology #robotics #groot
Researchers at ETH Zurich and 9T Labs have developed and successfully flight-tested a morphing aircraft made from 3D-printed composite materials. Its adaptive wings and V-tail change shape to control flight, reducing aerodynamic drag and improving efficiency. The lightweight structure uses strategically aligned carbon fibres to balance stiffness and flexibility. During its maiden three-minute flight, the drone demonstrated full control across roll, pitch and yaw, including successful loops and barrel rolls.
Video Credit: ETH Zurich
#engineering #technology
How can flexible circuits become lighter without compromising electrical performance or manufacturability?
DP Patterning’s Dry Phase Patterning process offers an alternative to conventional wet etching and printed silver inks. By mechanically removing unwanted metal from conductive laminates, the process enables flexible circuits using aluminium and copper-clad aluminium, with reported conductivity up to 2–3 times that of printed silver inks. With roll-to-roll production and reduced energy consumption, the approach could influence how engineers design, prototype, and scale lightweight electronic components.
Read the full article to learn more: wevlv.co/4ewU6CK
#engineering #technology #electronics
Power density, efficiency, and thermal management are becoming increasingly important in modern electronics, from AI data centres to robotics and automotive systems. Southchip is bringing its power management IC expertise closer to European engineers, with solutions designed to address demanding power conversion requirements. Its portfolio includes technologies for high-efficiency power delivery, including GaN-based solutions for emerging applications.
As Southchip expands its presence in Europe, it is also building local engineering support and partnerships to help customers address increasingly complex power design requirements. Explore how its IC portfolio is evolving to support the next generation of intelligent and electrified systems.
Read the full article: wevlv.co/489uVCF
#engineering #technology #chips #icdesign
