3DandFun.com 🚀

"Don't Touch It"... sorry, we couldn't resist showing this one off 💖 This pink flag for the Don't Touch It podcast is finished with their logo in bold red and white raised lettering, ade to fit the Elgato Wave:1, Wave:3 and Wave:3 MK2. #elgatowave #micflag #podcastsetup #personalisedgifts #3dandfun

Black Friday has come early, and it's wearing our colours 🖤 Our Early Black Friday sale is on for November only. Mic covers, Box Cubes and gifts with your logo, all for less. Beat the rush and get your order in while it's quiet ✨ Use code EARLYBF at checkout. Tap the link in our bio to start designing yours. #blackfriday #miccover #personalisedgifts #3dprinting #3dandfun

It's not only Mic Covers...Your controller deserves a spot on the wall as much as the family photos do 💜 This purple pad is sitting pretty on our acoustic panel controller mount, slotting straight onto the slats so it's off the desk and on display. Compatible with Xbox, PlayStation 4 and PlayStation 5 controllers, and available in 23 colours, so you can match your setup or make it pop. Give your gaming corner the finishing touch it's been missing 🎮 #controllerholder #acousticpanels #gamingsetup #3dprinted #3dandfun

Four layers, printed and cured in seconds. That's how your logo gets onto our mic covers ✨ Watch it build up from the very first layer, adhesive on film, into a full colour UV DTF logo ready to go onto a Shure SM7B / SM7dB Custom Box Cube Microphone Cover. Ready to give your SM7B a look that's unmistakably yours? 🎙️ Tap the link in our bio to get started. #uvdtf #sm7b #podcastsetup #smallbusinessuk #3dandfun

Yes, that's our own rainbow logo on the cube, and yours could be next 🎤 Meet our DJI Mic 1, 2 and Mini Handle with Box Cube Logo Cover: a sleek black handle topped with a crisp white cube that puts your branding front and centre in every shot. Ready to make your mic unmistakably yours? #djimic #micflag #journalism #contentcreator #3dandfun

Two sleeves, two crisp logo plates, and one cheeky plate caught off duty 👀 This set of Shure SM7B / SM7dB Custom Base Logo Covers was made for one fab podcaster, with her show name in bold white script on matte black. Simple, sharp, and instantly recognisable on camera. #shuresm7b #podcastgear #podcaster #3dprinted #3dandfun

Stop holding your tiny mics like this… 🚫 We've all seen it: the little wireless mic clutched in a fist, looking a bit lost on camera. Time to give it a proper glow-up. Our Logo Cover fits DJI Mic 1, 2 and Mini, and it carries your own logo, printed in your colours. Your brand, front and centre in every clip. 3dandfun.com/shop?category=m…🎙️ #djimic2 #djimicmini #contentcreator #smallbusinessuk #3dandfun

Yes, those purple drips on the door are printed, and yes, they're staying 💜 Meet one of the machines behind the magic. This is where your orders come to life, layer by layer, with the spools loaded up top and a shelf of colours standing by. Fancy something made especially for you? Tap the link in our bio to see what we can print next. #bambulab #3dprinting #madetoorder #smallbusinessuk #3dandfun

That black cube sitting under the SM7B? It's about to become the most recognisable thing in your shot. 🎙️ This is our Box Cube Microphone Cover, designed for the Shure SM7B and SM7dB. It gives that iconic mic a bold, square look that really stands out on camera. We add your own logo, printed in your colours, and send you a proof before anything goes to print, so you'll know exactly how it looks. Ready to put your show front and centre? Head to the link in our bio ✨ #sm7b #podcastsetup #podcastlife #streamersetup #3dandfun

We made a fully custom SM7B & SM7DB to brand-up your podcast or stream!

Unfiltered. Unapologetic. And now impossible to miss on camera 🎙️ This square flag for The ReWrite carries their pink script logo and black tagline on a clean white face, sitting proudly beneath a purple foam windscreen. Bold show, bold mic. #microphoneflag #podcastbranding #podcastlife #3dprinted #3dandfun

Three steps to your show name sitting proudly on your mic ✨ Here's how our RODE PodMic cover comes together: Just like the cream-on-brown cover we made for The Worthy Podcast. #rodepodmic #podcastsetup #podcastersofinstagram #podcastbranding #3dandfun

RE20 owners, your mic just got its own personalised cover. 🎙️ Say hello to the newest addition to our cover designer: the Electro-Voice RE20. That chunky, iconic broadcast mic now has a branded cover made to fit! Pick your mic, upload your logo as an SVG, PNG or JPG, choose how many solid colours it uses, and see your proof before you order. #re20 #electrovoice #podcastgear #personalisedgifts #3dandfun

Trick or treat? Our website has a spooky spinning wheel, and one lucky segment hides a treat 🎃 Fancy a treat? Give the wheel a spin, one go a day. Land on 10% Off and you'll bag a discount code for orders of £50 or more. Not your day? You might get Bad Luck, a Try Again, or a Fun Fact about 3D printing. While you're there, have a nosey at our microphone covers. We print everything to order and can put your own logo on yours. Tap the link in our bio to take your spin 👻 #halloweengiveaway #spinthewheel #podcastersofinstagram #smallbusinessuk #3dandfun

Our own logo, front and centre on the mic 🎙️ This is the cube cover we made for our Shure MV7, in a sleek dark grey with the 3DandFun logo popping out in full rainbow colour. It sits right at the heart of the setup, and it's the first thing anyone notices on camera. Yours can look just as bold. We print your logo in your colours on a Box Cube Cover for the Shure MV7i or MV7X. You'll see a proof before we print. Printed to order and usually dispatched within 5-7 days, from £59.99. Want your show on your mic? Tap the link in our bio to get started ✨ #shuremv7 #micflag #podcastsetup #streamersetup #3dandfun

Three covers, one seriously dramatic red drip. 🩸 These custom magnetic base plate logo covers for the Shure SM7B and SM7dB are all printed for Tales From The Celebrity Trenches Podcast. Brand your mic from the base up. Send us your logo, we'll print it in your colours, and you'll get a proof to check before anything hits the printer. Every cover is printed to order and usually dispatched within 48 hours, from £27.99. Fancy your show's logo on your mic? Head to the link in our bio to order yours. 🎙️ #shuresm7b #podcastsetup #podcasters #3dprinted #3dandfun

Our 'Custom Cover Designer' is now LIVE 🎉You can get a view of how your logo will look on a custom printed cover - 3dandfun.com/designer Select your mic model, add your logo file, position & resize, change shape, colours & even get a quote! #3dandfun #podcasters #streamers

3dandfun.com is now running a self built full e-commerce site. Podcasters, streamers, gamers. Just take a look at this 👇

Fresh off the printer! We now make 2 fully customised logo covers for the @elgato Wave mic 🎤 Your logo, your brand, front and centre on your stream Available at 3dandfun.com 🔥

We've been busy adding stuff to the fourthwall shop. Streamer have gotta go check these out! oldbaldg-shop.fourthwall.com…