Pinned Tweet
Just playing around and decided to create a bunch of arcade game using a Dual-axis PS2 style analogue joystick Module, an ESP32 Microcontroller and some jumper wires.
Let's just say I was just testing the waters and decided to do something useful with my time. 😊😅
What next ?
TheBigKen retweeted
Here's an Upgrade to the Arcade.
Check it out
TheBigKen retweeted
Just playing around and decided to create a bunch of arcade game using a Dual-axis PS2 style analogue joystick Module, an ESP32 Microcontroller and some jumper wires.
Let's just say I was just testing the waters and decided to do something useful with my time. 😊😅
What next ?
Here's an Upgrade to the Arcade.
Check it out
The Game is controlled fby the Joystick just to see the beauty of Embedded Systems.
It's beautiful ❤️
Just playing around and decided to create a bunch of arcade game using a Dual-axis PS2 style analogue joystick Module, an ESP32 Microcontroller and some jumper wires.
Let's just say I was just testing the waters and decided to do something useful with my time. 😊😅
What next ?
1
26
One thing I find interesting here is that designing something and manufacturing it are two different challenges.
CAD gives us the intended dimensions, but the manufacturing process introduces its own realities. That's why tolerance isn't just a technical detail
1
14
This goes beyond 3D printing, honestly.
Every manufacturing process has limitations, and good engineering involves designing with those limitations in mind.
A successful design isn't simply one that looks right in CAD; it's one that performs as intended when it's built.
1
15
A 10mm hole in your CAD file won’t print as 10mm.
It comes out smaller, often by 0.2 to 0.3mm.
Design the gap, not the part.
Then print a test block with 5 different gaps and push each peg in by hand.
That’s your printer’s real number.
2
106
One beautiful thing I've come to know about this life is that when you had a day well spent, you know.
Today was well spent.
1
22















