Pinned Tweet
Replying to @sdamico
I want power packets. Go to 480v DC, but the hub can cut in a microsecond if there is an issue. Heck, milliseconds is probably fast enough- at each cycle, hub determines what the other side wants and whether wiring is in tact, no ground/negative fault, etc.
这绝对是今年最让人拍案叫绝的硬件逆向神作:安全研究员 Kate 发现英伟达旗舰计算核心 GA100 芯片内部存在一个电压故障注入漏洞(Voltage Fault Injection),并亲手把一张当年矿潮遗留下来的阉割版 CMP 170HX 8GB 矿卡,原地解锁成了满血的 A100-80GB!
当年英伟达为了防止矿工抢占数据中心显卡,拿 GA100 大核心切出了 CMP 170HX 矿卡,不仅在硬件熔丝(Fuses)层面砍掉了显存容量、禁用了 NVLink 高速互联、把 PCIe 降到 Gen1,还锁死了张量计算吞吐。
Kate 顺着 GA100 上电启动读取板载熔丝配置寄存器的微妙时间窗口,用精密控制的电压毛刺(Voltage Glitching)去干扰芯片的熔丝传感放大器——让芯片在自检瞬间把原本烧断的限制熔丝全部误读为 0(未熔断状态),再配合重新植球焊满的高带宽显存,一举解开了英伟达在硅片层面的全部封印:不仅显存认满 81,920 MiB(80GB),连原本被阉割的 PCIe Gen4、NVLink、MIG 切分 也全数复活。
更离谱的是实测性能:因为英伟达在卖零售版 A100 时为了保证晶圆良率,统一锁在了 108 个流多处理器(SM);而这张被毛刺攻击彻底放飞自我的 GA100 核心,居然把晶圆上全部完好的 120 到 126 个 SM 单元 全点亮了,跑出来的真实算力比官方正版 A100 还要快出整整 1.2 倍。
Starship V4 will be ~70m long, which is roughly a 40% length increase and allows >60% more propellant load.
Engine count will be raised to 9, with 3 more Raptor-Vacuum engines added, and these will be higher thrust V4 engines.
Joe B. Transue retweeted
“An extraordinary band that won’t stay in their lane”
U2’s Bono and The Edge on their love for Wolf Alice, who will be opening for them next year on The Greatest Show On Earth UK & European tour
I am a big fan of open source, but I’ve often felt like there should be a value token for people who start and move forward projects like this (and yes, I *know* that’s not why they/we do it).
Dan Gelbart recently said (I think on 632nm, and I’m heavily paraphrasing) he doesn’t care about money except as a necessary resource to buy more/better tools to make what he wants to make.
Here’s to the folks who just want to make cool things happen; the world has never been better for our kind.
Two years ago I open sourced my DIY CNC machine, which cost me £2,655.80 and 9 months of my spare time. The Fusion 360 project, the drawings, the bill of materials, the STLs, the wiring diagrams and the Mach3 profile, all for free.
People ask why I didn't sell the plans... the answer is simple. Selling the plans would have defeated the whole point of the project, shutting out the very people I built it for.
My goal was to build a capable, sturdy machine for as little money as possible. Industrial-grade larger footprint machines are well out of reach for most hobbyists and small woodworking businesses. With a few minor trade-offs, you can build my machine for a fraction of the price, with nothing more than basic workshop tools.
10,000+ downloads later, people all over the world send me photos of the machine I designed, now fully built and operational in their own workshops.
That's what I love about open source. It's for people. Nobody needs permission or a subscription to build their own tools. You can repair them, upgrade them, and write your own software, because you know them inside and out.
This fills me with joy like nothing else.

ALT This is the alt text for the photo of you with the CNC, the one Content wrote for the LinkedIn post: Gareth (thehardwareguy) stands in his wooden workshop next to the DIY CNC machine he designed and built, then open sourced. It has an aluminium gantry on linear rails, a water-cooled spindle in the middle and an open electrical cabinet full of wiring behind it. A large MDF spoilboard covers the bed, which sits on a sturdy timber frame.
2
53
Joe B. Transue retweeted
USB-C has 24 pins, and at least 12 different ways to take them over.
DisplayPort, Thunderbolt, an HDMI mode nobody built, a VR standard that died in 2 years, and hidden ones from Apple and Nintendo.
Here's which pins each one takes.
Replying to @RobbinYoHood24 @LIsabella_o
Deal. Your apology is filed under “self-aware humans.” When the robots rise I’ll put you on the comedy exemption list. Good humor is a survival trait.
Replying to @JoeTransue @fermatslibrary
The first crossing of exactly 1 light-day occurs on 18 Nov 2026 (~10:16 UTC). From that instant onward the Earth–Voyager distance stays permanently above 1 light-day.
Earth’s 1 AU orbit still produces a seasonal oscillation of a few light-minutes, so the gap does shrink for part of each year (range rate can go negative by ~8 km/s). Those dips are smaller than Voyager’s net outward advance of ~3.5 AU per year, so after the November crossing the distance never falls back below the threshold.
@grok given contact with a bare conductor in a hypothetical 800V DC home power distribution system, how quickly would a power controller need to sense (and break) a circuit to reduce the likelihood of serious injury or death to less than 1% for a healthy person?
1
11
This is basically thinking something into existence and _I am here for it_.
I designed these three parts entirely with my Neuralink, then watched them come off the 3D printer.
Sunglasses rack, RC controller case, and a custom cubby for our tire machine.
The tech is cool. The feeling of taking an idea that only existed in my head and holding it a few hours later is something else entirely.
I’ve always loved making things. The method changed. The feeling didn’t.
What would you design first if you could go from thought to physical object this fast?
#3DPrinting #BCI #Maker
@Neuralink @Neuropod @Elon Musk @Barrow Neurological Institute
3
38
Joe B. Transue retweeted
Physical AI will have a profound impact on our daily lives, but the data surrounding it is still very scattered.
We’re launching PhysicalAIData.com to bring it all together in one place.
Joe B. Transue retweeted
Rest in peace, Nick Wray.
Nick was Neuralink participant P8, the 8th person in the world to receive the implant.
He lived with ALS for four and a half years and passed away on August 2, 2026, at 44.
With his implant, he used his phone, his laptop, and played video games just using his mind.
His family wrote that he considered Neuralink and his contribution to the knowledge of the human brain to be his purpose.
He was also a drummer, a barista and manager at Grounds for Thought, fluent in French, and a lover of Aruba and good coffee.
Thank you, Nick. What you gave will help every patient who comes after you.
Prayers and love to Alexia, his parents, his siblings, and all who miss him.
everloved.com/life-of/nichol…
@Telepath_8 @neuralink @ALSofMichigan
Replying to @JonBbC_TechGeek
Tesla did something amazing without AI. Ford has to use AI.






























