Glenn French (@glennfrench) header
Glenn French (@glennfrench) profile picture

Singer/Songwriter and Luthier, Dad to a percussionist https://nitter.cf/t.co/CZQE5w2c0c https://nitter.cf/t.co/ExqBBN7HDv

Connecticut, USA
Joined December 2008
Photo by Glenn French (@glennfrench)Photo by Glenn French (@glennfrench)Photo by Glenn French (@glennfrench)Photo by Glenn French (@glennfrench)Photo by Glenn French (@glennfrench)Photo by Glenn French (@glennfrench)Photo by Glenn French (@glennfrench)Photo by Glenn French (@glennfrench)Photo by Glenn French (@glennfrench)Photo by Glenn French (@glennfrench)
The song "You Made Us Cry" was considered for a presidential rally in 2016. The WAV file had to be cleared by the F.B.I. and made it to the team of Mark Meadows Chief of Staff. reverbnation.com/glennfr/son…
2
109
A Guild "The Westerly Collection with a repaired cracked bridge. The saddle was made from a bone blank. The bridge pins were incorrect for the instrument so Martin ones were installed. R
2
178
A 1958 Goya acoustic guitar. Made in Sweden. Adjusted string height at the nut. Increased the diameter of the bridge pins. The strings weren't seating properly. Touched up dings and scratches in the top. Cleaned fingerboard and polished frets. Buff and polish.
1
2
168
A side project of a $40 Chinese Martin D-28 copy. Neck re-set, bone nut and saddle, razor cut pickguard, 4 new position dots, Martin frets and bridge pins, repaired lifting bridge, and K&K pickup installed.
3
140
Guild "Westerly Collection" acoustic electric guitar. Repaired bridge and a fabricated saddle from a bone blank.
1
140
1926 Martin 2-17. Recently serviced by George Youngblood of Guilford CT. Neck re-set, hand made matching the original Brazilian rosewood bridge with ivory saddle. A Honduras mahagony top, ebony nut, end pin, and bridge pins. He even compensated the saddle.
1
4
378
A 1944 Harmony archtop guitar. I couldn't believe the craftsmanship. A shaved down bridge for lower string height (retaining the arch), repaired top crack, cleaned fretboard and treated with oil, and polished frets.
4
154
Removing an acoustic guitar neck with a jig designed by Bob Taylor of Taylor guitars.
5
169
Refretting a 1970 Gibson ES-345.
1
6
161
We're melting the glue at the dovetail joint. The 15th fret is removed and you drill 2 holes at a slight angle. Steam gets injected into the holes for neck removal. A new bone nut was made.
5
151
The recording studio I built. The plexiglass for the drum booth was about 300 pounds. FedEx helped me get it down stairs.
1
1
14
277
A song about your hunt for your favorite things. "A Thrill Of The Chase" reverbnation.com/glennfr/son…
1
4
133
I have to melt the glue where the fingerboard tongue is glued to the body with a heat gun and a putty knife. You remove the 14th fret and drill 2 holes into the fret slot. One on each side about 2" deep. You're drilling into the glued body joint. 2 minutes of Capochino steam.
3
149
A 1970 Gretch resonator guitar conversion to left-handed. The bridge had to be flipped and a new nut had to be made.
4
129
When you level and recrown frets over many years, each time the nut is affected. You have to deepen the slots of the nut to compensate. Then you replace the frets and the higher metal leaves you no choice but to discard and replace the nut.
1
3
158
If you're enjoying these posts, why not follow us on Instagram and Facebook. instagram.com/glennluthier?i… 1963 Stratocaster
1
5
172
Setting neck relief on electric guitars. This example is a Fender Squier Jazz Bass. You don't want the neck perfectly straight. You're using an allen wrench for adjustment. I'm pressing the last fret and a capo on the 1st fret. I'm shooting for .010" clearance at the 7th fret.
1
6
220
Steaming a neck off of an acoustic guitar to reset the neck. instagram.com/glennluthier?i…
1
12
413
A 1975 Ovation 12 string came in with 2 long cracks in the top, very high action, a lifted bridge, and a dead 9V battery for the pickup. The best acoustic guitar pickup I've ever heard.
1
6
247
Instagram Luthier page instagram.com/glennluthier?i… 1970 ES-345 full refret and upgraded electronics
3
32
867