Gray retweeted
The Cosworth Vega remains one of the strangest cars General Motors ever sold, and its existence was almost entirely down to the engine. The project began with the aluminium four-cylinder block from the standard Chevrolet Vega, an engine whose reputation for durability had already become a serious problem for the company. Rather than develop an entirely new powerplant, Chevrolet turned to Cosworth Engineering in England to develop a sophisticated cylinder head for the existing architecture.
What came back was a dual-overhead-camshaft design with four valves per cylinder. That meant sixteen valves in an American production four-cylinder in 1975, at a time when most domestic manufacturers were still relying on conventional two-valve arrangements. Placing the camshafts directly above the valves eliminated the pushrods, lifters and rocker arms required by a conventional pushrod valvetrain. Removing that reciprocating mass reduced the mechanical limitations on engine speed, while the four-valve layout provided greater potential airflow through the cylinder head. The result was an engine designed to breathe and operate at higher rpm than the ordinary Vega four-cylinder could manage.
The Cosworth engine was a 2.0-liter unit, equivalent to 122 cubic inches, with an aluminium block and cylinder head, a forged crankshaft and electronic fuel injection. The injection system was particularly unusual for an American production car of the period, adding another layer of sophistication to an engine that was already far ahead of the domestic norm. On paper, it looked like a genuine piece of advanced engineering: lightweight construction, twin camshafts, sixteen valves and precise fuel delivery. But the engine had to satisfy the emissions regulations of the mid-1970s, a period when manufacturers were struggling to reconcile performance with increasingly restrictive requirements. By the time Chevrolet had brought the package into compliance, the official output was approximately 110 horsepower. For a two-liter engine in 1975, that was respectable, particularly given the emissions constraints. It simply was not the sort of figure buyers expected from a car carrying the Cosworth name and a price approaching that of a base Corvette.
That price became one of the project's biggest problems. The Cosworth Vega was essentially a highly specialised four-cylinder Vega with a premium powertrain, but Chevrolet was asking buyers to pay sports-car money for a car that still looked like a Vega and delivered only modest performance by contemporary expectations. The company had planned for substantially greater production, but demand never materialised at the expected level. Approximately 3,500 cars were sold across the 1975 and 1976 model years before the programme ended. The cutaway engines displayed in dealer showrooms and used for technical training were intended to demonstrate exactly what made the car different. They exposed the twin-cam cylinder head, the sixteen-valve arrangement and the other engineering details that were difficult to communicate through a brochure. Chevrolet was asking customers to pay for technology they could see, even if the performance figures did not make the case as convincingly as the hardware itself.
What makes the Cosworth Vega interesting today is that the engineering concept was far more successful than the commercial package built around it. Aluminium construction, twin overhead camshafts, four valves per cylinder and electronic fuel injection eventually became familiar features of high-performance engines across the industry. The Cosworth Vega had assembled those ideas in an American production car years before they became commonplace, but it arrived in a vehicle whose reputation was already damaged, at a price that placed it against much more powerful alternatives.
The engine was not the fundamental mistake. The problem was the combination of timing, market positioning and the car surrounding it. Chevrolet had built a remarkably advanced four-cylinder engine, then installed it in a Vega and priced it like a Corvette. It was the right engineering in the wrong car, at the wrong price, roughly fifteen years before the market was ready to appreciate it.
Interesting. ( If, like me, you love engines, this guy is worth a follow) !
A diesel engine needs air to run, and a submerged submarine has no supply of fresh air and nowhere to discharge exhaust gases. That single limitation shaped the entire propulsion system of American fleet submarines during the Second World War, and it explains why the enormous engine in this photograph does not drive the propeller directly. These submarines used diesel-electric propulsion. The Cleveland Diesel engines turned generators, the generators supplied electricity to propulsion motors, and those electric motors turned the propeller shafts.
There was no mechanical connection between the diesel engines and the propellers. On the surface, the diesels could run continuously, generating electricity for the motors while also replenishing the submarine's enormous bank of lead-acid batteries. Once the boat submerged, the diesels shut down completely and the batteries supplied the electric motors. The submarine could then move without consuming engine air or producing exhaust, while also operating much more quietly than it would with large diesel engines running.
Electric propulsion offered operational advantages beyond the ability to travel underwater. Because the diesel engines drove generators rather than the propeller shafts, the number of engines running did not have to correspond directly to the submarine's speed. The crew could operate only the engines needed for a particular electrical load, conserving fuel when less power was required, or bring additional generators online when necessary. Batteries could be charged while the submarine was moving on the surface or while it was stationary. The electrical system also provided flexibility when machinery failed: a damaged diesel could be shut down without mechanically disconnecting it from the propeller drivetrain, because it was never connected to that drivetrain in the first place. This arrangement made the submarine's propulsion system more adaptable and allowed the engines, generators, batteries, and motors to perform separate jobs within one integrated system.
The engines came from the Cleveland Diesel Engine Division of General Motors, a distinct operation from both Detroit Diesel and Electro-Motive. Cleveland specialized in large medium-speed marine diesels and became a major supplier of submarine propulsion machinery during the war. One of its important designs was the 16-278A, a sixteen-cylinder, two-stroke engine used in Gato- and Balao-class fleet submarines. Roots-type blowers supplied the air needed for scavenging, clearing exhaust gases from the cylinders and filling them with fresh air for the next combustion cycle. The engine produced approximately 1,600 horsepower at 750 rpm, and four engines provided roughly 6,400 horsepower of installed diesel-generator capacity, although the power available at the propeller motors was lower after electrical and mechanical losses. Cleveland produced thousands of engines in the 278 family during the war, making the design an essential part of the American submarine construction effort.
Getting machinery of that size inside a submarine was an engineering operation in itself. Each engine weighed several tons and had to be lowered through an opening in the hull with very little clearance, carefully guided into position before the surrounding structure was completed and the pressure hull closed. Every component had to fit within a tightly constrained machinery compartment while leaving enough room for maintenance, access, ventilation, and the extensive electrical equipment surrounding it.
The installation was not simply a matter of putting an engine into a room; it was part of assembling an entire propulsion plant inside a pressure vessel. Restored examples of Cleveland Diesel machinery can still be seen operating in museum submarines, including USS Pampanito and USS Cod. They preserve a remarkable piece of engineering history: engines that never turned a propeller themselves yet helped propel an entire generation of American submarines across the world's oceans.
2
67
What ? Is this true ?
Unelected PM Burnham’s £235 extra tax on car manufactured before 2017 starts in April.
This tax will likely increase every year and move forward every year. The car tax of doom?
This will force people to buy EV’s as the number of new ICE vehicles available to buy is reduced to zero.
It’s all a ploy to force you to buy something you don’t want
birminghammail.co.uk/motorin…
2
1
228
Glad I never touched the stuff....
McDonald's loses lawsuit against chef Jamie Oliver, who proved that the food they sell is unfit for human consumption because it is highly toxic.
Chef Jamie Oliver won a lawsuit against the world's largest fast-food chain.
Oliver demonstrates how hamburgers are made.
According to Oliver, fatty cuts of meat are "washed" with ammonium hydroxide and then used to fill the hamburger patties. Even before this process, the TV presenter says, this meat was unfit for human consumption.
Oliver, a radical activist chef taking on the food industry, says:
"We are talking about meat that is sold as dog food and then served to humans. Aside from the quality of the meat, ammonium hydroxide is harmful to health." Oliver calls it "the pink slime process."
What sane person would put a piece of meat soaked in ammonium hydroxide into a child's mouth?
This might be crazier than I thought
In another initiative, Oliver demonstrated how chicken nuggets are made: After the "best parts" are selected, the rest—fat, skin, cartilage, eyes, bones, head, feet is subjected to a mechanical separation process called "Canica"—a euphemism used by food engineers.
This blood-pink paste, which is deodorized, bleached, refreshed, and re-colored, is then coated in flour and deep-fried. It is typically fried in partially hydrogenated oils—in other words, toxic substances.
The food industry uses ammonium hydroxide as an antimicrobial agent, allowing McDonald's to use meat in its hamburgers that is unfit for human consumption. Even more alarming, however, is the fact that these ammonium-hydrogen-based substances are considered "legal components of the production process" in the global food industry, with the approval of health authorities. Consequently, consumers will never know what substances are in their food.
Please stop giving this fake food to your children. 🤬🤢🤮
Readers added context they thought people might want to know
Jamie Oliver never sued McDonald's, and no court ruled that the chain's food is unfit for human consumption. Oliver's representatives confirmed no legal action took place. McDonald's discontinued using ammonium hydroxide-treated beef trimmings in 2011.
factcheck.afp.com/doc.afp.com.9V…
1
92
Can't go wrong can he ? I mean, if Man U continue playing like they are but manage to finish 17th....he can always say he's done his job & saved them from relegation.
If he's crying now, god help him in four months after he's watched Dalot lose his man for the 17th time in a single game, Rashford is too hungover to train and Luke Shaw is eating trifle for breakfast.
2
166
Gray retweeted
Replying to @BowesChay
Vladimir Putin with a message to Europeans: > “We used to sell you (Europeans) gas at $150 per 1,000 cubic meters. 'That’s too expensive,' you said.
Now you’re paying $1,000. And since storage facilities are empty, the price will hit $1,500 this winter...
You got what you asked for.”
For the first time in the company's history Daimler A.g. have announced this week , No futher investment in Germany.
Without cheap Russian Gas and Oil.
The mighty German Auto industry will crumble, with massive lay offs predicted
China is waiting to pick the bones..
Gray retweeted
Stellantis décide de privilégier Alfa Romeo au détriment de DS et Lancia italpassion.fr/stellantis/st…
Gray retweeted
Brother Burnham flew all the way to Cop meeting in Turkey to make a six-minute speech to an almost empty hall. No other G7 leader has bothered witt it this year.
Oil change & fuel filter on the CLS today. 8K motorway miles since the last change, which is a lot less than the recommended interval. Engines that run in clean oil last longer.....😉


























