Jeff Rowberg (@jrowberg) header
Jeff Rowberg (@jrowberg) profile picture

Director of Engineering for BioMech Health, #OSHW enthusiast, embedded systems developer. Digital organizer. I love learning new stuff and spreading knowledge.

Salem, VA
Joined February 2008
Yesterday afternoon, I got @claudeai to fix a compatibility bug in Operation Neptune, a DOS game from 1991, so my son and I could play it on a 1995-era retro PC just like I did when I was 10. These tools impress me regularly, but this takes the cake. reddit.com/r/ClaudeAI/commen…
1
1
227
Been a long time since I did a Blinky project on a new platform. I’ve never played with @ST_World STM32 before, so I thought it was time to broaden my horizons. Super easy to jump in with the Nucleo G0B1RE using @PlatformIO_Org on Linux. Even got OpenOCD debugging going!
2
188
What do you get when you mount a @Promethean ActivPanel to a @FlexiSpot standing desk frame and drive it with a little @Beelinkofficial N150 mini PC running Linux? The world’s biggest open-source 4K touch table! The possibilities are endless!
3
1
4
321
PCB engineers: I have a Black & Decker TO1750SB toaster halfway modded to an IR reflow oven. (It works, but I needed more internal volume.) I’d rather send it to someone than throw it out. Anyone interested for the cost of shipping? Relays+controller+thermocouple not included.
1
125
I have this extremely specialized custom 3-axis rotation platform full of @Actobotics parts, stepper motors, 6-wire slip rings, etc. I don’t need it anymore, but trashing it feels shameful. Anyone here have some project that could make good use of it?
1
3
134
Once again, I see why the @saleae Logic is my absolute favorite bench tool. Writing a high-level protocol analyzer in Python to decode @MicrochipTech MCP251836 CAN controller+transceiver SPI transactions is about as painless as it could possibly be.
4
178
Ever had one of those troubleshooting facepalm moments where you finally figure out the problem and then giggle at the absurdly stupid and obvious fix? If you have 12 peripherals on one SPI bus, make sure you properly configure all CS pins *before* you try to communicate. 🤦🏻‍♂️
1
2
66
I’ve ordered Digi-reels from @digikey lots of times, but this is the first time I’ve seen this. I didn’t even notice until after I’d loaded it into my PnP machine (which uses simple feeder arrays, or I would have noticed sooner). Do you see it? HINT: this picture is not mirrored.
1
156
Jeff Rowberg retweeted
Feeling overwhelmed with your digital footprint these days? Check out the weekly Tidy Tuesday newsletter for simple steps to take each week, covering a new topic every month. Make 2024 your year for Inbox Zero! #inboxzero #organization tidybytes.com/tidy24
1
1
84
I decided to implement Chutes and Ladders in Python, which took all of 10 minutes while my kids played it at the kitchen table. Interesting: the average number of spins to win always settles at 39 after a few thousand runs.
1
149
Jeff Rowberg retweeted
Curious about how you might organize basically EVERYTHING digital in your life? For this week's #TidyTuesday post, here's an overview of the excellent PARA method from Tiago Forte over at @fortelabs! tidybytes.com/blog/intro-to-…
1
1
271
…which also means it’s time to pull every last bit of this out and rebuild it with proper cable management and device organization. 😳
1
137
I have a bunch of XBee stuff that I haven’t touched in a decade. Is anyone interested in it? DM me if so.
5
2
17
2,433
Fun times today revisiting the Madgwick IMU fusion algorithm with a new core I2C layer using Perilib to see if it still works with the old Invensense/TDK MPU-6050. (It does.) This is 6-axis fusion on a SAMD21 MCU. Visualization courtesy of Processing v4.
7
29
243
22,572
Thanks to @MicrochipMakes for the publicity! For anyone curious, the source for this example can be found on @github. You can use any raw accel+gyro data to achieve the same results with the fusion algorithm in this code: github.com/perilib/perilib-a…
14
577
I've been working on this project for a while, and it's just starting to get a teensy bit of air under its wings. If you have any interest in personal data organization, check out the quoted link, as well as tidybytes.com/tyd for a video by yours truly! 🚀
I just finished successful setup and calibration of my shiny new @snapmaker J1 IDEX printer. To celebrate, I told it to print the built-in 2-color shark. Now I am VERY CONFUSED. 😂
2
3
This is what you get to do after you forget to put I2C pull-ups in the prototype design. At least it was a relatively simple fix though!