How to Properly Use Frame Generation for GTA 6 — From the Veyra Developer
Hey everyone! I'm the developer of Veyra.
Ever since it was confirmed that GTA 6 would run at only 30 FPS, my community has been growing incredibly fast.
Many players have discovered Veyra through different platforms and started using it. First of all, I'd like to thank everyone for your support and appreciation!
We currently have over 2,000 players in our community, and Veyra has also started gaining quite a bit of attention overseas.
So there's no need to worry too much about the software's usability or overall experience.
We've pushed capture card latency optimization almost to its absolute limits.
If you've previously tried using OBS or PotPlayer for capture and found the latency too high, I strongly recommend giving Veyra another try.
I think you'll notice a completely different experience.
How to Get the Smoothest Frame Generation Experience with 30 FPS Games
I'd like to share some tips on how to properly use frame generation with 30 FPS games while minimizing latency as much as possible.
First, even when playing a game running at 30 FPS, I still recommend setting your capture card to 60 FPS.
Why?
Because capturing at 60 FPS can actually provide lower display latency than capturing directly at 30 FPS.
The reason is illustrated in the image below.
As you can see, capturing at 60 FPS can reduce latency by more than half compared to capturing at 30 FPS.
However, when capturing a 30 FPS game at 60 FPS, half of the captured frames will inevitably be duplicates.
For example:
Original 30 FPS frames: ABCDEFG
Captured at 60 FPS: AABBCCDDEEFFGG
If you apply frame generation directly to these duplicated frames, the algorithm will try to interpolate between identical frames, resulting in poor frame generation quality.
Here's how to fix it:
Go to the Frame Generation section in Veyra and enable "Remove Duplicate Frames" or "60→30".
This converts the 60 FPS capture stream back into 30 unique frames.
As shown in the middle image above, you'll still maintain approximately the same low capture latency as 60 FPS capture.
At the same time, frame generation will no longer waste its work on duplicate frames, resulting in significantly better smoothness and visual quality.
🎮 Choosing the Right Frame Generation Model
For games running at 30 FPS, I strongly recommend using VFG instead of DLSS or XeSS frame generation.
The reason is simple: at such a low base frame rate, DLSS and XeSS struggle to avoid ghosting and jelly-like distortion.
With VFG in High Quality mode, you can achieve an image with almost no noticeable ghosting or warping artifacts.
If your GPU is powerful enough, the smoothness is genuinely incredible.
However, there's a catch: VFG High Quality is extremely GPU-intensive.
In my testing with an RTX 5070, generating a single frame at 4K using VFG High Quality takes approximately 20 ms.
This makes it mainly suitable for games running at 30 FPS.
But when it works, the result is unbelievably smooth. Seriously, smooth as silk.
What about Medium Quality?
VFG Medium Quality still produces significantly better results than DLSS or XeSS in low-FPS scenarios.
More importantly, its performance overhead is approximately 3–4 times lower than High Quality mode.
I highly recommend experimenting with both modes to find the best balance for your GPU.
🔍 Choosing the Right Super Resolution Model
I've noticed that many users still prefer DLSS SR.
However, because Veyra doesn't have access to the game's internal rendering pipeline, DLSS SR cannot deliver its full potential in our application.
The actual improvement is fairly limited.
Instead, I recommend using RTX Video Super Resolution.
Set the quality to Medium.
It provides a noticeable improvement in image quality without consuming too much GPU performance.
⚡ About Capture Card Latency
Let's talk about capture card latency.
Currently, most capture cards on the market use either 5 Gbps or 10 Gbps USB interfaces.
Across different brands, latency differences between capture cards using the same chipsets are generally quite small.
The main advantage of 10 Gbps capture cards is support for higher-bandwidth formats, including:
4K 60 FPS NV12
1440p 60 FPS HDR
4K 30 FPS HDR
Here are some approximate latency measurements:
Capture FormatLatency1440p 60 FPS NV1210–20 ms4K 60 FPS NV1230–40 ms4K 30 FPS P010 (HDR)80–100 ms
So, if you're extremely sensitive to latency, you can actually capture at 1440p 60 FPS NV12 and then use super resolution to upscale the image.
This gives you a much lower-latency gaming experience.
Although, to be fair, most people aren't nearly as sensitive to latency as they think they are.
Not everyone is an esports professional, even if they think they are. 😂
If you absolutely want native 4K resolution and native HDR, there's not much you can do.
Just get a PCIe capture card.
But if you're happy with RTX HDR, you can save yourself some money.
Simply enable RTX HDR inside Veyra.
The results actually look pretty damn good.
🛒 Recommended Capture Cards
5 Gbps Capture Cards
Supported formats:
1440p 60 FPS NV12
4K 30 FPS NV12
These are my first choice for 1440p users who don't need HDR. They're also suitable for 4K users who can tolerate slightly higher latency.
Recommended models:
MICHENSEN T800 / T900
KUHAIMI 27P / 26P
ACASIS 007 Pro / 009 Pro
AVerMedia GC553 Pro / GC551G2
Elgato HD60 X
10 Gbps Capture Cards
Supported formats:
1440p 60 FPS HDR
4K 30 FPS HDR
4K 60 FPS NV12
Recommended models:
MICHENSEN T911
KUHAIMI G50
AVerMedia GC553G2
Elgato 4K X
PCIe Capture Cards
Supported format:
4K 60 FPS HDR
Recommended models:
AVerMedia GC573
Elgato 4K Pro
For capture cards with the same specifications, feel free to choose whichever brand you prefer.
Based on my testing, latency differences between comparable models are generally within 5 ms.
There's no need to spend a fortune just for a different brand name.
That's all for now. Enjoy your games, everyone! 🎮
1
22
Left: Native gameplay.
Right: 4K 30 FPS HDR with VFG frame generation boosted to 60 FPS.
You can see just how insanely smooth the gameplay looks!
1
9
If you're concerned about Veyra's user experience, Veyra currently has 13 community groups, each with over 200 members, and there are still many players who haven't joined any of them.
Please don't assume everyone is an idiot. GTA 6 runs perfectly smoothly at 60–120 FPS, and the latency is well within an acceptable range.
1
1
32
If you also want to play GTA VI at 120 FPS, you should check out the software I made.
The latest version 2.1.9 is definitely the best version for you to play GTA VI
Enable frame generation and DLSS 5 on PS5, Xbox, Switch, and any other platform.
Of course, GTA 6 at 30 FPS is not a problem.
Claude封号我觉得更多是玄学了,唯一要注意的就是要自建Vps,固定ip来用,是不是家宽关系不大,我自己259一年的美西从9月28充值到现在猛蹬3个周额度,到现在正常一点问题没有,而且额度全部蹬满,那些所谓要留一点的也是被封出幻觉了,包括时区和语言也都是一样,纯中文使用也不会有任何问题
不过我目前还是pro账号,据说max的风控力度更大,下个月我冲个试试看
1
264
I took this 30 FPS GTA 6 footage, enabled RTX HDR and DLSS 5 with Veyra, and boosted it to 60 FPS! 🔥
But here's the CRAZIEST part... 🤯
Veyra can bring all these insane visual enhancements to consoles like PS5, Xbox, and Nintendo Switch through capture cards or supported Remote Play streaming!
And the latency? Don't even worry about it. It's seriously AMAZING! Just watch the video! 👀
github.com/Likely7/Veyra-NRV…
3
166








