
Co-founder @deployrobo (YC F26)
San Francisco, CA
Joined April 2025
- Tweets40
- Following43
- Followers122
- Likes28
Sahith Chada retweeted
I quit my job 2 months ago. Today, @deployrobo has robots live in production and $1M in contracted revenue for year one, $2.4M for year two.
The last couple of weeks have been crazy: preparing, commissioning, and finally watching our robots do real work on a customer’s floor.
Generalist robots can’t do everything yet, and that makes selling them genuinely hard.
Customers don’t buy potential. They buy work getting done.
As a deployment company, our job is to close that gap:
→ Find the use cases generalist robots can actually handle today
→ Stay right at the edge of what they’re capable of
→ Build a solution that adds real value to the business we’re serving
→ Go after customers with scale and use cases that fit our technology
That’s exactly what we did.
Through YC I talked to a lot of potential customers, with lots of flights and site tours.
One of the biggest lessons: knowing when not to take on a customer matters as much as closing one.
There’s a lot of work ahead: a lot of engineering, and a lot of making our customers happy.
Thank you to everyone who’s been on this journey with us.
We have the greatest team, one that’s been too busy to even take a group picture, haha.
It’s been a great 2 months, and hopefully a fulfilling lifetime.
See you at @ycombinator Demo Day. 🦾
Our robot arm fell mid-motion during a deployment. And that's not acceptable.
We'd been stacking patches for weeks. So Sai decoded the arm's CAN protocol and wired it straight into the Jetson Orin.
Full write-up + wiring guide is open source 👇
A robot that works in a demo isn't deployed. A robot that keeps working on shift 400 is.
Our @i2rt_robotics YAM arms kept dropping their connection: USB adapters falling off the bus, ports wearing out, an arm stopping mid-motion and falling. Every patch we added made the system more complicated.
So we removed the root cause. We decoded the arm's CAN protocol and wired it straight into the Jetson Orin. A few dollars of hardware, no USB in the motor path, and 81,000+ messages in a cable-yanking stress test with zero dropped.
This is the stuff nobody posts demo videos of, and it's the whole job. Building an autonomous system is one thing. Making sure it keeps working is deployment.
We wrote it all up and open-sourced it, wiring guide included: deployrobotics.co/blog/cutti…
Huge shoutout to Sai Avva Pranav on our team for leading this one.
@NVIDIARobotics @nvidia compute all the way.
1
2
92
I spent years building robot foundation models. The hardest part was never getting a robot to do a task. It was knowing when it wasn't doing it.
RoboJudge is the way to go👇
How does a robot know when it’s wrong?
Introducing RoboJudge from @deployrobo
A big part of deploying robots is building autonomous stations that know when something’s off: when to call for help, when to reset, when to just try again.
This matters more than it sounds. Until a robot can tell you it’s stuck, someone has to watch it all the time, which is a huge bottleneck in robotics deployments.
Once it knows to call for help, one remote operator can monitor a whole fleet instead of babysitting a single station.
So we built RoboJudge. It uses the same data we use to train and finetune the robot on a task, and learns not just the task but how it’s progressing over time. So the robot knows if it’s on track, or if it needs help.
Super excited to showcase RoboJudge at @ycombinator demo day!
58
A robot demo is exciting. Getting it to work reliably, shift after shift, is another challenge.
@irenekarrot worked on deploying autonomous vehicles. @sahithchada built robot models. They saw the same gap from different sides of robotics.
Now, @deployrobo is tackling it by focusing on completed physical work, tracking tasks and learning from human interventions along the way.
Because customers need results, not just a great demo.
hubs.ly/Q04CnyVH0
We turn generalist robots into reliable workforce.
No upfront cost. Just pay for work done.
today, we're launching @deployrobo, the generalist robot deployment company
thanks @ycombinator for backing us!
deployments, one of the hardest and dirtiest part of robotics has been long ignored. not anymore
ping us if you have models that we should be deploying @physical_int @GeneralistAI @perceptroninc @RhodaAI @bfl_ai @allen_ai
1
2
171
Our robots packed 800+ pens for attendees over the course of the show at DELIVER America
What still blows my mind: we literally drove down from SF to Vegas the day before and collected about 30 minutes of fine-tuning data to make all this possible!
People were moving the pen around, snatching it out of its hands, pulling the box away.
The robot kept trying and figuring it out. And sometimes it failed, which I actually loved, because those are the exact edge cases robots run into in real deployments.
3
118
Sahith Chada retweeted
Got into @ycombinator for deploying robots into the real world
What do you think are the best usecases for generalist robots today?
Reach out if you need manipulation tasks that need automation!
Got into @ycombinator for deploying robots into the real world
What do you think are the best usecases for generalist robots today?
4
4
403
At #cvpr2026 in Denver this week! Excited to be here. Lots on my mind around VLAs and world models. If you're working in this space, come find me or shoot me a DM 👋
#Robotics #VLA #WorldModels #PhysicalAI
🤖 Made with AI
4
148
Sahith Chada retweeted
Got the i2RT YAM bot running with MolmoAct2 today.
Off-the-shelf capabilities continue to impress, even in terrible 2am lighting.
Prompt: "place all objects in container"
Waiting on leader arm parts to try fine-tuning
@allen_ai @DJiafei @i2rt_robotics
Sahith Chada retweeted
sold a kidney, got a YAM 🫡
Did a bunch of research and @i2rt_robotics have the best bi-manual bots out there. Can’t wait to set it up over the weekend.
Being able to zero-shot policies on SO101 is a huge win for the open-source robotics community.
@huggingface @seeedstudio
Tried MolmoAct2 zero shot on SO101. genuinely impressed, can't wait to try this on a YAM bot.
Pick precision should be a lot better with the YAM model trained on depth, plus our wrist cam is literally a webcam right now lol.
Hats off to the team @allen_ai @hq_fang @DJiafei
3
174
Sahith Chada retweeted
Open weights + open data is how robotics actually moves forward. More of this please...
Sahith Chada retweeted
RoboHacks @ycombinator ! Watch Rocky execute a long-horizon sequence of tasks in a single run, driven solely by voice command.
Team Rocky: @IndraneelPati10 @sakshamKuk70566 @sahithchada @a_andlyu @irenekarrot . Thanks @innate_bot @ax_pey @GoogleDeepMind @nasa @iterate!
Sahith Chada retweeted
We made Jarvis, a robot assistant built for the 2026 Seeed Embodied AI Hackathon in sc.
Huge thanks to the amazing sponsors and ecosystem partners that made this possible: @seeedstudio @NVIDIA @PollenRobotics @huggingface @AgoraIO!
1/3












