
Founder @OfflineProtocol. Coordination layer for machines. Past: 2x acquired in consumer. Global Product Lead @Mastercard. Research @UNICEF, @WellcomeTrust.
Joined May 2016
- Tweets1.7K
- Following270
- Followers26.4K
- Likes217K
satvik retweeted
You're watching our engine decide by itself how a message gets through a network with no internet, no servers and no cell towers.
What you can see it do:
→ Hop-by-hop delivery. The message moves device to device until it reaches the recipient, and you can see the path it took.
→ Store and forward. When there's no path yet, devices hold the message and pass it on when someone comes into range.
→ Retries. Turn up "frames lost" and watch the engine resend what the air dropped.
→ Read receipts. Confirmation travels back across the mesh to the sender.
→ Islands. Shrink the radio range and the mesh splits into groups that can't reach each other. Messages wait at the edge until a bridge appears.
→ Cost. Every message shows how many frames and relays it took.
This is the hard part of offline-first apps, made visible. It's the same behaviour your app gets when it runs on phones in a stadium, a disaster zone or a basement with no signal.
Built by @mizanxali, with message animations by @pixelyokai.
simulator.offlineprotocol.co…
a lot of people i talked to at @EFDevcon couldn't picture how a message gets through an offline mesh network.
so i built this. every person on the map runs the real @OfflineProtocol engine (rust → wasm) in your browser. the only simulated part is the bluetooth link between them, and you get controls to tweak it.
add or remove people, pick a sender and a recipient, and watch the message spread through the mesh to reach them.
things to watch:
→ message delivery, hop by hop
→ store and forward
→ retries when the air drops frames
→ read receipts coming back to the sender
→ lost frames
→ the mesh splitting into islands when you shrink the radio range
→ how many frames and relays each message cost
try to break it: simulator.offlineprotocol.co…
message animations by @pixelyokai
satvik retweeted
a lot of people i talked to at @EFDevcon couldn't picture how a message gets through an offline mesh network.
so i built this. every person on the map runs the real @OfflineProtocol engine (rust → wasm) in your browser. the only simulated part is the bluetooth link between them, and you get controls to tweak it.
add or remove people, pick a sender and a recipient, and watch the message spread through the mesh to reach them.
things to watch:
→ message delivery, hop by hop
→ store and forward
→ retries when the air drops frames
→ read receipts coming back to the sender
→ lost frames
→ the mesh splitting into islands when you shrink the radio range
→ how many frames and relays each message cost
try to break it: simulator.offlineprotocol.co…
message animations by @pixelyokai
satvik retweeted
Offline Protocol SDK v0.33.0 is out.
Resends and delivery receipts now travel as far as the first copy did, across every hop of a phone mesh. In a simulated crowd of forty phones every delivery receipt comes back, and on a two-hop chain of phones, receipts slower than five seconds fell from 118 of 200 to 15.
React Native now requests the Android Bluetooth and Wi-Fi permissions the mesh needs in one call.
Development builds point out integration mistakes, such as a username passed where a device address belongs or a send before start(). Release builds stay silent.
No API is removed.
What's new: offlineprotocol.com/blog/sdk…
npm, PyPI and every binding: github.com/Offline-Protocol/…
satvik retweeted
Group hikes split up right where the signal drops.
@aditipolkam built Muster: phones in the group form a Bluetooth mesh, share live positions, and guide everyone to the leader's meeting point with a compass. No server, no account.
Built on our mesh SDK: github.com/aditipolkam/muste…
you’re on a trek, your group is spread across a few kms, and there’s zero network. how do you tell everyone if the lunch plan changed?
i built muster - offline location sharing app
- save an offline map for your trek region while you have signal
- phones find each other over bluetooth
- the leader’s location and meeting points hop phone to phone over the mesh
- location details are plotted on your offline map
- you follow by route or compass, fully offline and reach the meeting point comfortably.
no server, no tower, no internet.
powered by the @OfflineProtocol sdk
links 👇
satvik retweeted
Autonomous operations for robot fleets, no internet required.
@mizanxali built MeshRover at @ETHGlobal Mumbai, and it keeps running when the network is gone.
Every robot doubles as a relay. Camera frames travel robot to robot over an Offline Protocol mesh to a base, where a @0G_labs AI model running in a TEE makes the call, and the decision comes back over the same mesh. No towers or Wi-Fi needed.
If an answer doesn't arrive in time, the robot stops safely. Entering a restricted zone needs a human to sign off with @worldnetwork ID, and every robot and operator has a role on @ensdomains v2.
A full control loop running over the mesh. One of the many use cases where our stack can enable seamless operations.
Built MeshRover at @ETHGlobal Mumbai.
Robots that never touch the internet.
Each one sends a camera frame to a central base over an offline mesh built with @OfflineProtocol, hopping through other robots along the way. The base asks a @0G_labs AI model running in a TEE and sends the decision back over the same mesh.
If the AI says stop, or the answer doesn't arrive in time, the robot stops safely.
Entering a restricted zone also needs a human: an operator approves with @worldnetwork ID on their phone.
The fleet is managed on @ensdomains v2: every robot and operator has a subname with a role and an expiry.
Project link: ethglobal.com/showcase/meshr…
satvik retweeted
Offline Protocol SDK v0.32.0 is out.
Service subscriptions: a device subscribes to a service on another device and gets every update over the mesh, with no server and no internet. Updates are sealed end to end, or not sent at all. Available in the browser engine, React Native, Flutter and Python, and every binding is regenerated.
Bluetooth LE links now stay up with the app in the background or the screen off, and an Android link recovers by itself when the app on the other phone restarts.
New C# bindings over the C API: typed config, storage, events and transport callbacks.
npm, PyPI and every binding: github.com/Offline-Protocol/…
Just shipped v0.32.0 of @OfflineProtocol mesh SDK!
- Service subscriptions: lease a topic on a peer's service and get every update as it's published, end-to-end encrypted over MLS
- Missed updates come back on the next renewal, no server in between
- New binding: C#
- BLE that holds up in a pocket: a backgrounded iPhone keeps its links, a screen-off Android keeps finding peers
And more bug fixes and optimizations!
github.com/Offline-Protocol/…
satvik retweeted
Offline Protocol joins Zebra Technologies' PartnerConnect program.
Zebra's rugged handhelds, scanners and wearables run the world's warehouses, delivery routes, yards and store floors. Those are exactly the places where Wi-Fi ends at the dock door and cellular drops behind concrete and steel.
Offline Protocol gives them a network of their own. Devices sync records, message and hand off work directly over Bluetooth and Wi-Fi Direct, relay across an entire site, and reconcile with your systems the moment any device gets a link. Scans, pick lists, check-ins and proof of delivery keep moving through outages, dead zones and network failures.
Through PartnerConnect we're bringing offline-first operations to Zebra's resellers, integrators and the frontline teams that run on Zebra every day.
Learn more and book a pilot: offlineprotocol.com/partners…
satvik retweeted
Check out this demo for a Splitwise-style app to manage group expenses, completely offline.
There are infinite ways to implement our infrastructure across any industry, all you need is some curiosity.
We want to support developers building on our SDK, keep sharing your ideas!
satvik retweeted
On Zohran Mamdani:
Insane how people can see a political candidate that spent his entire time among the people - taxi drivers, artists, senior citizens, minimum wage workers, bodega owners, halal cart operators, social media creators, club goers, marathon runners, religious leaders, community organization members, live sports attendees, literally any and every part and demographic of the city, all while answering every question with poise and purpose, and yet say that he is a bad guy who doesn’t care about the city.
My whole life I’ve been so disillusioned and disappointed by politics and politicians globally and witnessing this campaign has been a ray of hope and sunshine and a showcase of how campaigning should be and what’s possible if a politician really cares about the causes he’s fighting for and the people who he wants to lead. This campaign will inspire a new generation of politicians that will pave change and boost representation of ideas and values among the traditionally archaic political guard.
satvik retweeted
hi mumbai
took some raw pics w this and edited them 🤓 see the raw below lol
Take beautiful RAW images on iPhone.
Free. No signup, data, or gimmicks.
Give it a shot - testflight.apple.com/join/Nj…
satvik retweeted
It's been a hard few weeks for security, with breaches and leaked credentials affecting a lot of people. It's a reminder of why we keep building systems that don't depend on a single point that can fail.
Our weekly newsletter by @chai_really rounds up the news, and what our team shipped this month:
→ Bluetooth payments for the Zcash community by @sxtvik, which complete even with both phones in airplane mode
→ Radius by @mizanxali: walk into a room and your phone shows who nearby is worth meeting
→ A smart hub by @bahdotsh that runs your home's devices with no internet
Plus, we'll be at Devcon in Mumbai, and we look forward to seeing you there!
Read the full roundup 👇
offlineprotocol.com/blog/a-t…
satvik retweeted
We’ve joined NVIDIA Inception, @nvidia's program for startups building with AI 🤖
At Offline Protocol, we have spent the past year experimenting and making multiple breakthroughs in on-device intelligence and federated training across heterogenous devices.
We are now combining this work with our existing stack which lets phones, machines, and edge devices find each other and work together directly, with no internet or cloud in between. This unification provides a shared intelligence layer on top of our existing coordination layer to enable a brand new category of hardware and software applications.
Inception has already given us access to NVIDIA’s partners who are helping us with product validation, along with developer tools, technical training and a flourishing enterprise network as we grow.
Stay tuned for more news about our intelligence work.
satvik retweeted
Epoch 13 maybe over, but we're not planning to stop talking about the cohort any time soon 🗣️
@OfflineProtocol is an encrypted mesh networking kit that lets devices communicate securely without the internet.
What they're building is pretty cool. Check it out 👇
satvik retweeted
Multiplayer games in your browser, without servers or sign ups!
Only possible with Offline Protocol 🎮
satvik retweeted
Offline Protocol is now on @claudeai and Claude Code.
Describe the app you want to build. Claude picks the SDK packages, plans the architecture and previews the starter files.
Try:
• Group chat for a festival with no signal
• Share files between phones in airplane mode
• A field team checklist that syncs when crews meet
• Agents coordinating on one local network
• A smart home hub that keeps running when the internet drops
Add the connector: claude.ai/directory/offline-…
satvik retweeted
Offline payments on Offline Protocol.
What blockchain should we experiment with next?
Built something for the @Zcash community using the @OfflineProtocol SDK:
A shielded ZEC payment between two phones in airplane mode, over Bluetooth.
→ A café asks for 0.042 ZEC nearby
→ The customer's wallet verifies the café's key and opens an encrypted session before any amount is shared
→ They pay with Face ID, and the signed shielded transaction goes straight to the café's phone
→ The café's app accepts it and sends back a receipt
→ When the café's phone comes off airplane mode, the transaction goes to the network and gets mined
Nothing is final until it's mined. Until then, both phones keep the same record and a receipt, and the chain still settles it.
Shoutout to @megabyte0x for reaching out and inspiring me to share this feature from a larger offline payment network I was ideating on last year.
@zodl_co @ZcashFoundation @zodl_app
satvik retweeted
Offline Protocol SDK 0.31 is out.
A browser now runs as a full node: its own identity, encrypted sessions, and links to phones and boards over WebRTC and Web Bluetooth.
Plus a Ruby gem, Flutter at React Native parity, and live Bluetooth signal strength.
Release blogs:
1. SDK 0.31: a browser runs a full Offline Protocol node: offlineprotocol.com/blog/sdk…
2. SDK 0.31: a Ruby gem, Flutter parity, live BLE signal and sessions that heal: offlineprotocol.com/blog/sdk…
Changelog:
offlineprotocol.com/changelo…
satvik retweeted
Offline Protocol is now on ChatGPT and Codex.
Describe the app you want to build. It picks the SDK packages, plans the architecture and previews the starter files.
Try:
• A walkie-talkie that works with no signal
• Find my friends, no server
• A neighborhood social app
• Agents coordinating on one local network
• A smart home hub that keeps running when the internet drops
Install the plugin: chatgpt.com/plugins/plugin_a…




























