vswitchzero (@vswitchzero) header
vswitchzero (@vswitchzero) profile picture

Retro PC and gaming enthusiast. On YouTube at https://nitter.cf/t.co/SdhVLppFhH 🇨🇦

Canada
Joined September 2017
Replying to @S0N1Cua
That one could be Winbond BH-5/CH-5 😁
1
2
33
Although they aren't true 486s like the AM5x86 is, I should also mention to the Cyrix 5x86 and the 83MHz Pentium Overdrive 🙂 youtu.be/dQOmSKERPd0
1
2
6
124
Replying to @GoodTofuFriday
I did indeed! Issue was a flaky clock crystal. You can find the video here: youtu.be/ASouxxQyABk
1
2
49
I bought three #3dfx V3 3500 cards on eBay. One “tested, working, mint” and two “untested, as-is”. Guess which one is broken 😂 Amazingly, the two as-is cards work perfectly. I figured I’d have to repair one or both.. not the “working” one 🔨
10
6
95
4,498
YouTuber Miasmark is breaking more records in the #isadoom25fps challenge! This time with a WD90C31 ISA card and a score of 40.4FPS. Check out his latest video. Now I definitely have to find some time to start cooking again 😎🔥 youtu.be/GRRt3gtcAvY
1
22
1,327
I’m very curious if adding SMD caps to the unpopulated pads at the rear of a V3 would improve power delivery/overclocking 🤔 Anyone ever seen this done or could suggest appropriate value range to try here? I’m coming up empty in my searches ⚡️
8
2
29
5,811
Finally got a physical copy of one of my retro favourites.. Terminal Velocity! 😁👍 @ScottApogee #RETROGAMING
6
2
36
1,271
New Video! Join me as I repair a particularly stubborn #3dfx Voodoo 3 2000. Mistakes were made, but it was a great learning experience as always 👍 youtu.be/hrPNvE3BNgU
1
4
42
2,002
Picked up a MAG DX700T CRT monitor this weekend for a great price. It’s a 17 inch model with a Sony Trinitron tube. Seems to have some minor geometry issues and an overly bright picture. Anyone know if there are any common issues with these? Caps perhaps?
6
3
61
3,430
After the failed EEPROM replacement I started tracing all the relevant pins. Looking promising! This damaged trace near a via leads to the “OE” or “Output enable” pin. Continuity appears to be severed! 😮
28
1,050
BIOS chip flashed in a TL866 II with a known good ROM file and soldered on. No dice, unfortunately. There is something else going on here 🤔
3
29
1,499
Replying to @furan
Thanks! The 3dfx detect utility can see the card on the PCI bus without issue. The IDs look valid compared to a “good” V3. I put it in another system with an ISA primary VGA card, but same unknown flash manufacturer flashing error 🤔
1
2
108