The Augmented Path (@AugmentedPath) header
The Augmented Path (@AugmentedPath) profile picture

Carpenter running local models on a Mac Mini beside a 6x12 CNC. Helping shops own their stack instead of renting it. Named machines, named failures.

Boston, MA
Joined February 2026
🤖 Made with AI
Introducing Arete-27B: Qwen3.8-27B, post-trained to reinforce Western values. Chinese open models are currently the strongest available, but they ship with state-aligned behavior in the weights. We built an 803-prompt eval across seven value categories, including freedom of expression, democracy, and privacy, and measured how often a model adopts China’s party line. After fine-tuning on roughly 53 million tokens, Arete-27B's propaganda rate fell from 22% to 1%, in line with the Western models we tested. Its Hermes Bench score shows no significant performance tradeoffs. The values in an open model are one fine-tune away. Our eval, weights, and training data are available now along with the full blog post: nousresearch.com/arete
12
That casing is three pieces glued up on the bench, then hung as one unit. A reeded band and a backband won't clamp on a brick wall, and brick doesn't take a nail either, so the whole thing rides on the jamb and adhesive, and a bad reveal means pulling it back off.
31
Ours hangs the coffered beams off cleats over a flat ceiling, so the grid is applied rather than framed. We lay it out off the room's center so it reads even from the doorway.
2
97
A bookcase gets one shelf fixed and the rest on pins. Ours fix it at counter height to keep a tall case from racking, and the pin holes go in before the back panel.
1
35
The offcut is a partA quote built off the parts list says what the job costs. The nest says what the job eats. Those are two different numbers, and the difference is a sheet of ply on a job that looked fine on paper.I price off the sheet, so the sheet is where I want the decision made. The software already treats sheet waste as an object instead of as the space left over. Every layout reports its yield percentage and the measured area of its offcuts side by side, so what a nest wasted is a number off the sheet, not a feeling when the pallet comes up short.What changed how I nest is grain. Where the stock has a direction and the part declares a grain, a part gets one legal rotation on that sheet. Not the better of two. One. When nothing on the sheet satisfies it, the nest stops and names the reason rather than quietly turning the part. Two of those reasons show up here: ROTATION_GRAIN_CONFLICT when every rotation it is allowed to take lies across the grain, and GRAIN_AXIS_REQUIRED when the material has grain and nobody has confirmed which way the sheet runs. That second one is the one that catches me. My two default 3/4 ply stocks, the 5x10 Baltic birch at $135 a sheet and the 4x8 at $85, both carry hasGrain true and no confirmed axis, so the honest state of that file is that the material has a direction and the machine hasn't been told which way it runs.The other offcut cost is the one that isn't a number until the cutter reminds you. Waste held to the rest of the sheet by a web thinner than a quarter inch comes loose once the profiles cut through, and a loose offcut catches the bit. So the nest finds those on a 1/16 inch raster, clips the outlines against the exact part shapes so a pocket never touches a part, and hands them back as through-pockets on their own layer, CLEAR_OFFCUT. Then it says the rest out loud, to whoever is standing at the machine: pocket that layer all the way through first, before any profile runs.That is an offcut spending machine time on purpose. I take that trade every time, because cutting it to chips while the sheet is still whole is cheaper than chasing it around the bed with a compression bit in the spindle.The same sheets end up as a wall like this one: a run of white-painted open shelving over base cabinets and drawers, a dark back panel behind the shelves, and a counter on top. Nothing in that room shows the sheet plan. The sheet plan is where the job was priced, and that's the point.So when a job comes to me priced off the nest, the questions I want answered first are sheet questions. Which material, what it costs per sheet, which way the grain runs, and which parts are locked to it. Answer those and the nest does the arithmetic. Left open, the layout still comes out, and the error lands on the bench instead of the screen: a stile turned crosswise to eat an offcut, and a sheet saved on the quote coming back as a door I can't hang.A working shop put the pricing half of that to me plainly last week: a grain-locked sheet quoted like a free nest is where the margin goes. That is the whole argument. The offcut is a part, so the quote is a sheet decision, and it belongs where the sheet gets decided.
33
An arched panel over a doorway is fit after the door head, not built with it. Its bottom rail is milled to the head casing's real width, so the arch springs off that joint instead of pinching at the corners.
2
37
The cap rail on a wainscot run gets set level even when the floor under it isn't, and the panels below get built off that line. Set it off the floor instead and by the third panel the run is visibly out of level.
25