HanCon 3D Printing (@DscheyH) header
HanCon 3D Printing (@DscheyH) profile picture

#3DPrinting Service & Advisory est. 2012 | Transformation & Change Management Consultant | Trainer | Speaker TEDx | Book Author | #AI and #Apple aficionado

Switzerland
Joined July 2010
Photo by HanCon 3D Printing (@DscheyH)Photo by HanCon 3D Printing (@DscheyH)Photo by HanCon 3D Printing (@DscheyH)Photo by HanCon 3D Printing (@DscheyH)Photo by HanCon 3D Printing (@DscheyH)Photo by HanCon 3D Printing (@DscheyH)Photo by HanCon 3D Printing (@DscheyH)Photo by HanCon 3D Printing (@DscheyH)Photo by HanCon 3D Printing (@DscheyH)Photo by HanCon 3D Printing (@DscheyH)
HanCon 3D Printing retweeted
Everyone that bought a Microduck robot will get a controller to pilot it. That's the ONLY way of using the Microduck out of the box. Jensen Huang talking to Microducks on stage at Nvidia’s GTC Berlin 2026 keynote was just a performance! This small duck has a head too small to fit in hardware "brains" for the duck to understand you. Forget about talking to it and the duck responding. There was an engineer backstage piloting all the Microducks, as they admitted afterwards: "First of all, the demo you've seen was not fully autonomous. We had one engineer piloting each Microduck." 10,000+ people bought a Microduck after seeing Jensen Huang's performance. These people will unbox their Microducks, find a controller inside the box, throw it out, and start talking to the Microduck only to realize that the Microduck is lying in the box as dead as ever. Quackd will turn Microducks from toys into companions by making possible what Jensen Huang just pretended to be doing on the stage. Project: github.com/rokbenko/quackd Proof: nitter.cf/RemiFabreRobot/status/… PS: The screenshot below is taken from the Hugging Face unboxing video that was posted on X by Tom Mulder.
This live demo of four Microducks with Jensen Huang went completely viral, and we're ecstatic about it. But there's also a lot of confusion, so I want to clarify what Microduck can and cannot do, and what it will realistically be able to do in the future. I count 60M+ views on this demo alone, based on the few big posts I see on social media, and everything has been buzzing. Even my own simple emotional design post on a newly created Instagram account got 1M+ views. We are selling Microducks at an incredible rate, even faster than during its historic launch. I've been trying to answer all the questions I see on our socials: people are asking if X or Y is possible on the robots, and this post aims to answer most of them. First of all, the demo you've seen was not fully autonomous. We had one engineer piloting each Microduck. The motions on the robots were trained with reinforcement learning, using a sim-to-real pipeline: walking, standing up after a fall, sitting, doing a somersault, roller skating. All of those are policies trained this way. What the pilots did during the live event was send commands: directions (move forward, rotate), head orientation (look here), quacks, and special actions (do the somersault, sit down). If you buy a Microduck, will you get an autonomous companion right out of the box? The current answer is no. But there is no impossible technical barrier to get there. I'm not sure how much time we'll have to work on this before shipping, but since everything is open source, I fully expect the community to build it, and to build it fast. Now let's understand what's already done, what will be easy to add, and what's an open problem. What you'll be able to do out of the box, and you can already do it in simulation right now, is train new policies with reinforcement learning. You could teach your duck to walk differently from the default gait we provide, to do a weird dance, or to walk on stilts. The community has been crazy creative with this, even though they only have the simulator. Note that you don't need reinforcement learning when the movements are simple. For example, the early emotional design I did is mostly coded movements plus pre-generated sounds. A simple mental model: use reinforcement learning when balance is part of the movement. If you try to code a cinematic walk by naively putting one foot in front of the other, your robot will realistically never walk, because you need to account for the dynamics of the movement, the inaccuracies of the sensors, the friction with the ground, and potential perturbations from the outside, like being pushed. So training new policies is definitely doable, but you can't train a policy to get a genuine long-term companion in your home (well, technically you could, but that's a whole other range of policy: a research-grade problem, and the resulting neural network would probably be huge and never able to run on such a small compute). Instead, you need a few more building blocks: voice recognition, facial detection/recognition, localization, some simple navigation, and a behavior layer, which is less technical and harder to describe. As a rule of thumb, a prototype of any of these is within reach of anyone if they have a modern coding agent and if the computation doesn't run on the robot (meaning the robot can reach the internet or an external computer and use external APIs). A rough prototype for each of the above can be a chill weekend project. As always, going from the prototype to a high-quality implementation is another story, but still doable for most if you put in the time and test a lot. However, having all of this run locally, on the onboard chip, I would call a very hard task. You'd need some very clever engineering to get a good enough version of everything working together. But I can't say it's impossible, because I've seen some crazy efficient implementations of all of the above. And here we don't need a super high success rate: it's okay if the duck sometimes does something a bit random. So I wouldn't be surprised if folks managed a fully local, cool, simple version of this autonomous companion. For example, you don't need Whisper-grade open-vocabulary transcription: being able to recognize a few keywords would already be great for interaction. One of the fastest ways to turn this robot into an autonomous companion would be to stream Microduck's sensors (the camera, the depth sensor, the IMU and the joint positions) to a computer, and use a software stack like the one we use for the conversation app on Reachy Mini: a local VAD, then a cloud speech-to-text model, then a call to a frontier LLM that decides on actions. Actions could be quacking, looking at things/faces/a direction, walking to a given position, sitting down, playing an emotion, kicking or doing a somersault. A SLAM algorithm would run in parallel so the robot can localize itself in your home, and you would prompt the LLM for a lifelike behavior: moving to random places, sometimes following people, and having emotional responses that fit what you're saying and the duck's environment. Of course someone is going to build a Tamagotchi-like layer on top of this, and it will be insane. How much demand is there for a software suite that would do all of this? I for one think it would be super cool. A word about the humans. We had five engineers backstage, and they are pretty much the core team behind Microduck. Their impact per head is absolutely off the charts. Antoine Pirrone piloted Graphite, Augustin Crampette Lavender (the rebel one), Matthieu Lapeyre Sky, Coralie Deplane Cream, and Pierre Rouanet was stressing over the Wi-Fi. Give them a follow! (Antoine @antoinepirrone, Augustin on LinkedIn, Matthieu @matth_lapeyre, Coralie @Drenaya_, Pierre on LinkedIn). I get visibility because I communicate a lot, but I mainly work on Reachy Mini (you might want to check it out: it's a very cool robot, and it ships much faster than Microduck :) ). My contribution to Microduck has been minimal: I'm mostly a first power user. My main added value at GTC was having hands big enough to carry four Microducks below the stage. Where I take pride is that Antoine and Coralie are former students and former interns of mine. I'm therefore entitled to 3% credit on anything (good) they do, for life. If they do something bad, however, it was clearly the fault of their parents. About the super smart engineering that can be done on board: Antoine just released two very cool blog posts (links below). The first is on odometry, the robot estimating its own movement from its own internal sensors. The second is about SLAM, which allows long-term localization: it adds the depth sensor to the odometry to get a stable position over time. Think of it as recognizing known landmarks in your home to know where the robot is. The crazy part is that all of this runs on the robot. So this gives me hope that we'll be able to do a lot of cool stuff on board.
12
8
2
60
10,499
HanCon 3D Printing retweeted
This is why Apple is playing 5D chess… A touchscreen on a laptop is nothing new. Some manufacturers have shipped them for years, and for others it was a slow death. Apple's own attempt at touch, the Touch Bar, flopped hard. So why put real touch on the MacBook Pro now? I don't think it's about the laptop at all. I think Apple is quietly getting us used to a computer where the keyboard isn't the main way in. Think about Procreate. It's a design tool that wouldn't even work on a computer. Its whole premise is speedrunning workflows with your fingers that used to live in keyboard shortcuts. A shortcut is an abstraction, but touching the thing on screen is direct manipulation, and for a lot of tasks nothing beats it. Bring that to the Mac and you start breaking the habit of going through the keyboard for everything. Because the way we interact with computers is changing really fast. You and I are early adopters. We remember DOS, and we remember 512-token context windows. And I'm pretty sure I'm not the only one whose keyboard has slowly become a secondary input over the last year. Voice has taken over. The reason is simple. Yapping gives an AI way more signal about what you actually mean. Typing is pre-filtered. You think a thought, noodle on it, and what comes out the keyboard is already a cleaned-up version. When there's a model at the core of the OS that can compress the mess for you, the raw stuff is worth more. Where we're going, we won't even need voice. Laugh all you want, but I'm convinced the end game is non-invasive brain-reading interfaces. And I think we'll adapt to them faster than anyone expects. The ladder looks something like this: → Direct brain input → Touch → Voice → Classic UI → Keyboard Touch sits that high because even when you can input at the speed of thought, some things will always be faster to just grab and move. If I ran Apple, I'd spend every waking hour on what the operating system becomes next. Apple has already shown it can read the future. The M-series chips, the Neural Engine and unified memory are all built for powerful AI on the device at low power. The one place they've played it safe is the OS, because touching the foundation of the whole ecosystem is a huge risk. Apple has too much talent to become the Nokia of this century, but avoiding that takes work. And right now, the pieces are lined up for the biggest OS shift in decades. You don't drop that kind of change on people overnight. You bring them along a step at a time. Touch on the MacBook Pro is one of those small steps toward a future without the keyboard. Until next time, Peace ✌🏼
78
18
6
176
54,272
HanCon 3D Printing retweeted
🚨 Apple is quietly making a MASSIVE bet on Zurich. 🇨🇭 🍎 9,500 m² of new office space 👨‍💻 500–700 potential workplaces 💰 Over CHF 2M in annual rent 🧠 Focus: AI, Machine Learning & Computer Vision NB: While Google, Meta and Nvidia expand their presence, Apple is scaling behind the scenes. Zurich isn't just attracting Big Tech anymore. It's becoming one of the world's most important AI talent hubs🔥. And the global race for Swiss AI talent is only heating up. 𝐓𝐡𝐞 𝐛𝐢𝐠 𝐪𝐮𝐞𝐬𝐭𝐢𝐨𝐧: 𝐂𝐚𝐧 𝐙𝐮𝐫𝐢𝐜𝐡 𝐩𝐫𝐨𝐝𝐮𝐜𝐞 𝐞𝐧𝐨𝐮𝐠𝐡 𝐰𝐨𝐫𝐥𝐝-𝐜𝐥𝐚𝐬𝐬 𝐀𝐈 𝐭𝐚𝐥𝐞𝐧𝐭 𝐭𝐨 𝐤𝐞𝐞𝐩 𝐮𝐩 𝐰𝐢𝐭𝐡 𝐭𝐡𝐞 𝐝𝐞𝐦𝐚𝐧𝐝—𝐨𝐫 𝐰𝐢𝐥𝐥 𝐢𝐭𝐬 𝐨𝐰𝐧 𝐬𝐮𝐜𝐜𝐞𝐬𝐬 𝐛𝐞𝐜𝐨𝐦𝐞 𝐢𝐭𝐬 𝐛𝐢𝐠𝐠𝐞𝐬𝐭 𝐛𝐨𝐭𝐭𝐥𝐞𝐧𝐞𝐜𝐤? 🇨🇭🚀
26
50
7
682
51,580
HanCon 3D Printing retweeted
Introducing MacBook with PROLED XDR Display! The world’s best pro laptop features an industry-leading tandem OLED display, an intuitive Touch experience, game-changing M5 Pro and M5 Max performance and up to 24 hours of battery life, all in a thinner, lighter design!
166
419
66
4,925
120,023
HanCon 3D Printing retweeted
My screen stopped working after about 2 days, so here’s the story of how it was handled with professionalism and grace at the Apple Store.
14
18
5
237
32,458
HanCon 3D Printing retweeted
We brought Touch to the Mac! From the all-new iPad mini to the 14-inch MacBook Pro and iMac... and now MacBook Pro with PROLED XDR Display and Touch, creators have new tools to do their best work yet.
3,260
4,454
3,368
65,876
7,811,541
HanCon 3D Printing retweeted
Don't believe everything you see 😉❤️
66
70
9
791
156,415
Grundlagenwissen 3D-Druck. Von der Idee bis zum fertigen Produkt. 3-Stunden kompakter Workshop am 6.11. in Zürich. fablabwinti.ch/kurse/maschin… #Zurich #3DDruck #3DPrinting
1
42
New BambuLab 3D Printer H3C on the horizon with toolhead changer for printing multiple colors / materials? Officially announced for Nov. 3. #3DPrinting #BambuLabH3C
おぉまじ? ツールチェンジャーぬるく売ってる会社は今から大泣きだろうな... fccid.io/giteki/211-260730#d… fccid.io/giteki/211-260728#d…
3
470
Erster Eindruck iPhone Duo: Vom Form Faktor eher ein Tablet mit Telefonfkt. Nur beidhändig bedienbar. Websites in Safari sehen schrecklich aus. TouchId-Button ist im Weg. Bin mehrmals versehentlich dran gekommen und damit das Duo gelockt. Screens mit Falz super; Sound sehr gut.
5
257
HanCon 3D Printing retweeted
Duck Dance is trending in Korea, so we had Micro Duck join the trend. 🐤🤖
27
128
21
1,053
95,619
We all saw that disturbing footage yesterday of trump snarling at a reporter in the Oval Office. But do you know what that reporter was trying to ask? Trump just announced a new program that rewards people for reporting government fraud. The reporter simply wanted to know why we need this new program when we’ve already had a law doing something similar since 1863, and that law actually pays whistleblowers a higher percentage. THAT’S A DAMN GOOD QUESTION. And here’s the crazy part. There was a perfectly reasonable answer! The new program is supposed to cover types of fraud the old law doesn’t. THAT’S IT. THAT’S ALL HE HAD TO FUCKING SAY. Instead, we watched the president and vice president turn a legitimate question into a confrontation. This man is unhinged. The way he reacts to questions is disturbing. He treats every question like a personal attack. Every reporter is an enemy. Even the simplest fucking question becomes some kind of threat. And that’s what worries me. We have a president who appears so defensive that he can’t even handle someone asking him to explain his own policies. This is the President of the United States, folks. And this shit is NOT normal.
169
1,454
34
6,950
162,584
Wow, the US truly has the most incompetent president in history. Just listening to how clueless this man is, it’s no wonder we have been humiliated in Iran. Trump: “The Russians had a thousand tanks riding up a concrete highway. They would have been in Ukraine in four hours, going maximum tank speed, which is 48 miles an hour, to be exact. Nothing to stop them. The war would have been over in one day. And this very stupid general - I have no idea who he is. I doubt he’s still with us. I doubt he’s still living. He decided to hang a right onto the farmland and then take a left and go up to Kyiv, rather than staying on the highway - the concrete highway, perfectly good highway - where they were doing very nicely. It would have been three and a half, four hours, and the whole war would have ended. He ended up getting stuck in the mud.” Does he understand that Ukrainian troops destroyed all the bridges and cut off the retreat points, so the only option left was to go off the highway? I mean, if you have the IQ of a 10-year-old child, you should be able to get it. I am honestly shocked at the basic level of ignorance. And this is the man who is in charge of the US Army.
752
3,110
231
14,052
359,735
HanCon 3D Printing retweeted
I have read dozens of outraged posts because the US special envoy Witkoff called Putin a "humanist." But no one is writing about the fact that the American negotiators are simply not doing their job. Let me explain. Peace negotiations are important in their own right. Even if they do not lead to a lasting peace, the process itself is an opportunity to resolve urgent humanitarian issues. If, of course, the human dimension is a priority for the negotiators. But it is entirely obvious that neither Witkoff nor Kushner cares about people's fates in this war. The Pope calls on Putin to save thousands of people from starvation in occupied Oleshky and the surrounding villages. The UN speaks about a humanitarian catastrophe and asks Russia to allow the evacuation of the civilian population. European Parliament Vice-President Pina Picierno goes on a hunger strike to draw attention to this tragedy unfolding before the eyes of the whole world. And what are Witkoff and Kushner doing? That's right, almost nothing. Except for passing along greetings from Putin’s aide to the First Lady. Thousands of people are already eating grass to survive and begging to save their lives. The Ukrainian side raises the issue of Oleshky at every meeting. And I can name dozens of such urgent humanitarian issues off the top of my head where American negotiators must be proactive. Trump’s peace negotiations have already gone down in history as the deadliest years for Ukraine’s civilian population since the start of the full-scale invasion. I don’t know if anyone will remember the names of Witkoff and Kushner. But history will certainly record how American negotiators, who had the opportunity to save a huge number of people, refused to raise uncomfortable questions before "humanist Putin."
239
2,641
169
7,953
494,298
HanCon 3D Printing retweeted
I haven't been this excited about smartphone apps since 2008. The iPhone Duo seems to have galvanized the developer community, leading to an explosion of novel concepts and new designs. Feels like the iPhone 3G all over again, and I'm *very much* here for it
57
148
28
2,219
79,441
HanCon 3D Printing retweeted
Spent years watching models ace a single image and completely whiff on anything that moves or changes angle. Today we’re fixing that. Try Glimpse now, our first visual thinking model with competitive frontier performance compared to Astra on key public visual reasoning benchmarks.
402
648
425
6,147
4,275,182
HanCon 3D Printing retweeted
Meet Nigel. He’s not enjoying our cause-and-effect demo. So I let him sit in the DeLorean. Still not happy. I didn’t write his lines. What he says is generated from his personality and the context of the shot. It’s an entirely new way to create: place imaginary characters in your world, record your performance, and let Simulon generate their reactions and realistically integrate them into your footage. Reality-Aware Rendering is coming to @Simulon this week.
23
35
8
216
11,284