Who is going to help me tell my new followers that I primarily tweet about my kid?
Okay, there’s a sprinkle of tech and good vibes here but, it’s mostly my boy.
Ice Cream retweeted
RE: PURPORTED REMOVAL OF PASTOR JIMMY ODUKOYA AS SENIOR PASTOR OF THE FOUNTAIN OF LIFE CHURCH
17 November 2026
Our attention has been drawn to media reports alleging that Pastor Jimmy Odukoya has been removed as Senior Pastor of The Fountain of Life Church.
We categorically reject this purported decision and wish to clarify that the announcement does not represent a constitutionally valid decision of the Board of Trustees of The Incorporated Trustees of The Fountain of Life Church.
Rather, it represents the position of certain individuals who have constituted themselves into a group describing itself as “Concerned Members of the Board” and who continue to act outside the constitutional framework governing the Church.
It is important to place on record that, as far back as 14 March 2026, these Trustees were formally called upon to resign from the Board on account of their repeated and flagrant violations of the Church’s Constitution and its founding principles and objectives. That communication was duly delivered to and acknowledged by the Trustees concerned, and one of the Trustees subsequently tendered a resignation following that communication.
Regrettably, rather than address the constitutional concerns raised, the remaining individuals have continued to undertake actions purporting to bind the Church without complying with its governing Constitution.
For the avoidance of doubt, Pastor Jimmy Odukoya remains the duly appointed Senior Pastor and Chairman of the Board of Trustees of The Incorporated Trustees of The Fountain of Life Church. His appointment was unanimously approved by the Board of Trustees in September 2023, and no constitutionally valid decision removing him from either office has been established.
The Constitution remains the governing instrument of the Church. No individual or group of individuals can substitute their preferences for the express provisions of that Constitution.
We therefore call upon members of the Church, the media, and the general public to distinguish between the pronouncements of these individuals and the constitutionally authorised position of The Fountain of Life Church.
We remain committed to the founding vision, peace, unity, spiritual mission, and constitutional governance of the Church and reserve the right to take all appropriate lawful steps to protect its integrity.
The Fountain of Life Church is governed by its Constitution, not by the unilateral declarations of any group of individuals.
Issued by:
The Fountain of Life Church
Ice Cream retweeted
I still believe one of the best businesses to be in right now is cybersecurity
Recurring, mission critical, and getting more urgent every month!
Ice Cream retweeted
Crossed 75k a few minutes ago and we have now officially crossed our numbers from last week’s Black Friday!
6+ hours to smash 100k.
Congratulations to us all ❤️
Ice Cream retweeted
10k orders already this morning.
Thank you Lord for keeping things running smoothly!
Road to 100k today! 🚀
#ChowdeckBlackFriday
Hard agree!
I think we need to kill more features.
Your team knows which features should go, being objective you possibly do but keep them “because they might work later” while talking about and shipping new stuff.
Where’s the room and bandwidth for those new bets?
uncooloj.com/writing/we-need…
3
714
Ice Cream retweeted
The genius you express in the work you do is a glimpse of God. So do not burden yourself with replicating your success. Just stay studious and keep showing up.
God is the genius and you are just a vessel. ❤️
This tweet is so delicious.
I think we'll see 5x the number of people become hardware and robotics founders over the next 18 months
Why? Because you can rent every step, from design to manufacturing:
DESIGN
- Astra to drive Blender, FreeCAD, and KiCad the way a person would, so you get editable geometry instead of a dead render. Zoo dot dev's text to CAD API if you want it programmatic.
- Or have Claude write build123d code, which is Python parametric CAD, and there's a Claude Code plugin that runs it and exports the STL for you.
PROTOTYPE
- Bambu A1 mini is $299, P1S around $399 on sale. Or skip owning one, JLC3DP prints and mails it for about $20. PCBWay does resin, SLS, and CNC if plastic won't cut it.
ELECTRONICS
- KiCad for the board, Astra can drive it. JLCPCB fabricates and assembles, often under $100 for a small run. ESP32 for wifi, Raspberry Pi if it needs a brain.
ANYTHING THAT MOVES
- Unitree sells a Go2 with a full SDK for about $2,500.
- Hugging Face put out a $399 open-source biped.
- LeRobot gives you the whole train in sim, deploy to real pipeline, and Physical Intelligence open-sourced π0 so you're fine-tuning instead of starting from zero.
- Prototype the policy in MuJoCo or Isaac Lab first.
MANUFACTURING
- Alibaba RFQ for the first 100 units. Check 1688 to see what the factory actually charges domestically, then negotiate. Pietra or Sourcify if you want someone to handle it.
FULFILLMENT AND SELLING
- ShipBob or Amazon FBA. Shopify for the store, TikTok Shop for distribution, Kickstarter if you want the money before you build it.
How to think about starting your own robotics or hardware company:
1. Pick a niche that's already buying weird gear. Cyclists, tabletop gamers, beekeepers, home baristas, dog people with mobility issues. These groups spend money on specific objects and complain in public about what doesn't exist. Or grab ideas off Ideabrowser.com
2. Go read the complaints. Reddit, IG etc Search "I wish someone made," "does anyone make," and "modified my." That last one is the best signal, because someone already hacked the product together and you're just manufacturing what they built by hand.
Also check Etsy!! If 3 sellers are doing a janky 3D printed version with 400 reviews each, the market is validated.
3. Make one. Describe it to Astra or Claude, get the CAD, print it in ugly gray PLA, use it, fix it.
4. Only go to Alibaba or similar once you've sold a few. Message 10 suppliers through RFQ, take the third cheapest, always pay the $50 for a sample before the real order.
5. Film everything from day 1. The first ugly print, the failed version, the box of 100 arriving. That's your entire marketing budget, and hardware is one of the few categories where people actually want to watch the thing get made.
6. Raise the price. Almost everyone here anchors on what the plastic cost. Your customer is comparing you to nothing, because the alternative is the product doesn't exist. Start at 5x COGS and go up.
THIS GOAL OF THIS POST IS JUST HERE TO GET YOUR CREATIVE JUICES FLOWING. Of course, you can build robotics/hardware in a bunch of different ways.
One thing I've learned is data couldn't be more important when you're building a hardware/robotics startups.
These models learn from first person video of a human doing the task, and that footage doesn't exist for almost any job.
So basically you pick one repetitive job people quit over, film someone doing it for 2 weeks, fine-tune π0 on that footage, use organic to sell the first few units and figure out scaling,
5 years ago you needed a factory, a supply chain, and a $1M just to find out if anyone wanted the thing.
Now, anyone can become a hardware/robitics founder.
And I suspect a lot of people will become one!
Vibe manufacturers.
1
5
1,236
Ice Cream retweeted
Building a platform that needs to offer your customers their own accounts?
@ournuvion gives platforms, fintechs and MSBs API access to banking infrastructure, so you can offer named accounts in USD, GBP, EUR & more, without becoming a bank yourself.
Send me a DM.
Learn to build a harness, folks.
It's not surprising to me that so many YC builders want to build domain-specific harnesses.
If you work long enough on a domain-specific problem, you quickly realize the opportunity. But you also realize how important that harness will be to stay competitive in the agentic era.
From a product perspective, harnesses open up interesting new surface areas and experiences for the services/products you provide.
From a technical perspective, harnesses are how you build and maintain a framework and set of best practices for how your users/customers interact with what you offer.
Understanding how to build and design a harness means you can build much stronger intelligence stacks, given that you can customize it and understand the domain well. That's extremely valuable. It may not seem apparent yet, but a harness wave is coming.
If you are getting started, give this list of harness papers to your agents and start upskilling: academy.dair.ai/papers/colle…
If you are already a builder, try building one for your specific domain. It's a lot of fun, and you learn a lot of interesting things to enhance your current agentic tools.
Ice Cream retweeted
Student asked me: non-root containers, do I fix that in the Dockerfile or the Kubernetes manifest?
Set the user in the Dockerfile. Strip the shell binaries so nobody can spawn one. Then set it again in the pod's securityContext.
Ice Cream retweeted
Your partner broke up with you because their AI hallucinated and catastrophised the regular couple argument you had 🫶🏾
👀
BREAKING: All departures stopped at London Heathrow and Gatwick airports due to an ATC technical issue.
NATS said in a statement: "We are investigating a technical issue which is causing some disruption to flight departures. Our engineers are on site and we will provide an update as soon as we can."
737
Ice Cream retweeted
We are stepping in! If not @Shuttlersng then who? 🙂↔️
Word on the street is, you’ve been left stuck between expensive rides and cars that just aren’t it. 🌚
You don’t deserve that.
You deserve Shuttlers Pod 🚗💚
It’s coming on September 25 and we’d love to pick YOU up first.
Join the waitlist here: shuttlers.co/pod
Ice Cream retweeted
This is a good time to curate your TL and be intentional about who you follow and the contents that comes to you directly. I've done the work for you, just follow all these people.
[ arranged in no particular order ]
Engineering :
@marlene_zw
@unicodeveloper
@czarify
@sarah_edo
@cassidoo
@akinkunmi
@ASpittel
@AdamRackis
@chiziaruhoma
@Samson_Goddy
@bolaabanjo
@saniyusuf
@matteocollina
@coder_blvck
@honour_can_code
@cassiecodes
@AdoraNwodo
@SQLBrethen
@chinedu_10
@ireaderinokun
@tomisin_dev
@Abiodun0x
@mykeels
@iChuloo
@SRunsewe
@chidiwilliams__
@Timmysofine
@kvlly
@Sisinerd
@bleso_a
@Geektutor - You'll get alot of community info.
@julian__duru
@Didicodes
@edesiri
@musti_ag
@silasadedoyin
@lanreadelowo
@ebenezerDN























