Creative Bear retweeted
These controls panels are a super fun little electronics project. I really enjoyed designing them, I'm excited to get them mounted on my office wall. Find STL's and links to the components on @Thangs3D.
Download:
#1 than.gs/m/1525493
#2 than.gs/m/1525494
Creative Bear retweeted
If you’re on Windows, never, ever, ever, ever run a random EXE file from the internet.
This Post is from a suspended account. Learn more
Creative Bear retweeted
Hot Take
.3mf files suck
they are not universally usable between slicers and printers and I'm constantly loading / reloading files and at this point I'd rather just have an STL with basic settings outlined in the file description
Creative Bear retweeted
It seems like a lot of commenters don’t fully understand why you would want a high chamber temperature. For materials like PLA and PETG, an enclosed printer can be helpful mainly to block cold drafts that might cause parts to lift or warp off the bed, but those materials generally prefer a low ambient air temperature and strong part cooling. This is why many enclosed printers recommend leaving doors open or actively venting when printing PLA, and why some machines include automatic exhaust systems to prevent the chamber from heating up too much.
Materials like ABS, ASA, Nylon, and Polycarbonate behave very differently. These materials generally benefit from, and in some cases require, a much warmer ambient air temperature to reduce thermal gradients within the part (carbon/glass filled materials dramatically help too). Keeping the entire print warm improves layer bonding, reduces internal stress, and dramatically lowers the chance of warping or cracking. A basic enclosure helps by trapping heat generated by the heated bed, but relying on the bed alone places a hard limit on how warm the chamber can get. Insulating the enclosure improves heat retention, but the most effective solution is adding an auxiliary heat source, commonly referred to as a chamber heater.
A chamber heater allows you to actively set and maintain a target chamber temperature, often controlled through the printer or slicer, such as 60-70C for materials like ABS or ASA. The heater cycles on and off to hold that temperature consistently and also shortens warm-up time before a print starts, which is especially important for large or long-running jobs.
Chamber heaters must be integrated safely. This typically means using a properly rated solid state relay to control heater power, redundant thermal safety cutoffs, correct grounding and electrical isolation, and firmware or controller integration so the heater shuts off automatically when a print finishes or if a fault occurs.
If you don’t have a chamber heater but still want stronger and more reliable prints, a common approach is to heat soak the enclosure using the heated bed. By bringing the bed up to the final print temperature and holding it there for 10 to 20 minutes (depending on enclosure size and bed power), the chamber air, frame, and motion components can reach a more stable temperature. Many setups also use a bed fan mod to circulate warm air from the bed throughout the chamber, helping reduce temperature stratification and improving print consistency.
In short, chamber heaters aren’t about making every printer hotter all the time. They exist to give you control over the thermal environment when the material demands it. Once you move beyond PLA and PETG, controlling chamber temperature becomes an important factor in print reliability, part strength, and dimensional accuracy, not a luxury feature or a gimmick.
Creative Bear retweeted
Get on board the Hype Train!! 🎉
🚂 New print in place train set available now on Printables, Thangs and Makerworld!
Creative Bear retweeted
🚀 We’ve seen some incredible projects powered by the PolyDryer™ modular system 🔥🖨️
And guess what… you asked, we listened 👂✨
🎉 Starting TODAY you can grab the PolyDryer™ Dock 👉 without the box! 🙌
us.polymaker.com/products/po…
Show us what you’ll create with your setup 👇💡
#polymaker #3dprinting #PolyDryer
Creative Bear retweeted
Front Page fun on Twitch tonight! We have some great guests, giveaways from @LDOMOTORSJASON @Polymaker_3D @PolarFilament @headamame & more! AND we're raising money for @SU2C!
Creative Bear retweeted
We did it chat! @Twitch front page acquired for this Saturday 8-2 at 7pm EST 😍
What do you want to see on stream that day? It's going to be over 6 hours of chaos😅
Creative Bear retweeted
A sneak peek of another NEW project getting ready to debut at @rmrrf !
A new design of LED wall lights coming soon!
And these neon prints glow!
Creative Bear retweeted
You're always welcome to join us - even when we have a full deck (at the moment, right now): twitch.tv/MakerDeck
Creative Bear retweeted
Maximize your MakerChip Production, or simply get started! Tip's & Tricks to shave time off your prints. Join me LIVE in the @Polymaker_3D Discord at 1PM EST. discord.gg/xuaG5UzN?event=13…
Creative Bear retweeted
🤯Awesome Make shared by "keithdkewi" from
@Cults3D
🏎️RC 1/10 Batmobile - 1989
🦇 cults3d.com/en/3d-printing/r…
▶️ Download 3D printing model:
👉 cults3d.com/:2000200
💡 @Car_Print_3D
#3DPrinting #rccars #3dprinted #RC #rchobby #rchobbyshop #makecults3d
Creative Bear retweeted
Link is here: youtu.be/5E0M4s17r-U
I 3D printed a Mini Server Rack! When @geerlingguy showed one of these off, I didn't really "get it" until I had a specific use case myself. So I dove in & designed a FULLY 3D printed (- cage nuts & screws) 10" Mini Rack for our @Ubiquiti hardware to mount in at Black Thorne!
Creative Bear retweeted
FixumBEAR
Is now available on @printablescom
I hope it makes @fixumdude smile 😁
#FDM
#BarryBearAndFriends
Creative Bear retweeted
My frame assembly video for the LDO Box Turtle is now live! @LDOMOTORSJASON
I've still got a ways to go on this build, but the frame was pretty easy!
Creative Bear retweeted
🚨🚨🧵📈16,000+ Rolls Incoming! 🚨🚨
Officially just days away from restocking your favs AND bringing in some new types, colours, and sizes!
Read more about what's coming here 👇
Filaments.ca
#3DPrinting #3dprinted #filament
Creative Bear retweeted
We’re hosting our first, true free MakerDeck meetup IRL in the Seattle area! events.com/r/en_US/registrat… - if you’re interested or know someone who might be. There’s never a perfect place or time, but maybe we’ll get enough interest to do something every month?
Creative Bear retweeted
We will be removing our files from MakerWorld later today.
Please find the latest Positron parts on GitHub via our website.
Additionally, @NomadsGalaxy will be removing all of their uploads. ✌️
Future uploads will be on Printables and Thangs.
Creative Bear retweeted
NEW VIDEO!
So, Bambu Lab...What are you DOING???
Is limiting API access to your printers, removing featurers and support for software and products people want and sometimes NEED a good choice for your business in the long run?
and what is even this all about anyways?
Creative Bear retweeted
🚀 Labor Day Special! 🚀
Celebrate craftsmanship with the RKDR Solo II, the ultimate retro handheld arcade emulator. Handcrafted with 40+ hours of meticulous work, this limited edition console brings 800+ vertical arcade classics right into your hands. buff.ly/2XOv63i












































